Make sure this part fits

GM 12477498
Upper Hinge, Passenger Side

2000-2004 GM

Customer Questions & Expert Answers (17)
GM 12477498 Upper Hinge, Passenger Side
  • Part Description
    Hinge, Door Hinge
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12477498
    Part DescriptionHinge, Door Hinge
    Other NamesHinge; Door Hinge
    Item Dimensions7.7 x 4.7 x 3.1 inches
    Item Weight4.10 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU12477498
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2004 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 12477498 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12477498 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What size pilot hole should be drilled at each center punch location for the 2002 Cadillac Escalade? Posted by Customer
    A:
    A 3 mm (1/8 in) pilot hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the retaining nuts be installed during reassembly for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Install the four retaining nuts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    What should be done after removing the hinge for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Clear all remaining weld from the pillar surface for a flush fit of the service hinge and repair any damage to the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done before refinishing the metal surfaces for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Clean and prepare all bare metal surfaces, and consult GM 4901M-D-2000 GM Approved Refinish Materials for recommended products, avoiding the combination of paint systems and adhering to the paint manufacturer's recommendations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the procedure for bodyside hinge replacement for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Follow a similar procedure: remove related panels, eliminate excess sealer, sand the existing hinge, center punch the weld marks, drill through the hinge base only, and remove the hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after removing the hinge for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Clean the pillar surface to ensure a flush fit for the service hinge and repair any damage to the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step for the lower cargo hinge for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Inspect and restore any damage, then remove related panels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    How do you position the service hinge for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Position the service hinge within the scribe marks and center punch each hole location on the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step in the installation process for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Attach the hinge to the vehicle, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    What should be done after removing the hinge for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Clear all remaining weld from the pillar surface for a flush fit of the service hinge and repair any damage to the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after inspecting the upper cargo hinge for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    How do you remove the hinge for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the hinge, using a chisel if necessary, and clear all remaining weld from the pillar surface for a flush fit of the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after removing the hinge for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Clean the pillar surface to ensure a flush fit for the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after inspecting the upper cargo hinge for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    What tool is used to drill out the necessary factory welds for the lower cargo hinge for the 2004 GMC Yukon? Posted by Customer
    A:
    An 8 mm (5/16 in) spot weld remover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    What should be done to the existing hinge before removal for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Eliminate any excess sealer around the existing hinge and scribe its location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12477498, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12477498 Upper Hinge, Passenger Side. It is sometimes referred to as GM Door Hinge, GM Liftgate Hinge. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12477498 Upper Hinge, Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery