How to service and repair the Exhaust Pipe on Chevrolet Tracker?

The Exhaust Pipe servicing needs the vehicle lift along with vehicle support before beginning the work. Two bolts securing the Exhaust Manifold front pipe/twc assembly need removal so the electrical ho2s2 connector from the heated Oxygen Sensor can be unconnected. Take off two nuts which will lead to separating the front pipe/twc assembly from its place on the resonator/muffler/tail pipe assembly. Subsequently detach the hanger that supports the twc. You should first remove the front pipe/twc assembly from the vehicle before cleaning both the gasket and seal mating surfaces. The installation of any new exhaust system component requires using exclusive fresh gaskets and seals. Position the front pipe/twc assembly to its vehicle seating and use a hanger for twc support. Screw two nuts into the front pipe/twc assembly to join it with the resonator/muffler/tail pipe assembly but refrain from full bolting them at this stage. Secure the electrical connector of heated Oxygen Sensor (HO2S2) before you attach the front pipe/twc assembly to the Exhaust Manifold using new seals. Then tighten its two bolts loosely. Translation of all system components comes before fastener tightening to minimize noise production and vibration. Use a torque wrench to secure the front pipe/twc assembly-to-exhaust manifold bolts at 50 nm (37 ft. Lbs.) as well as the front pipe/twc assembly-to-resonator/muffler/tail pipe assembly nuts at 35 nm (26 ft. Lbs.). Finally, lower the vehicle.

OEM Chevrolet Tracker Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Exhaust Pipes found

View related parts
Chevrolet Tracker Exhaust Pipe
Part Number: 91173460
$254.73 MSRP: $611.85
You Save: $357.12 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe; Front Pipe; Pipe, Catalytic Converter; Pipe, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Tracker Muffler & Pipe
Part Number: 91176510
Product Specifications
- Other Name: Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet Tracker | Base, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Muffler & Pipe
Part Number: 91175657
Product Specifications
- Other Name: Muffler, Exhaust (W/Resonator, Exhaust & Tail Pipe); Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler; Muffler, Exhaust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2003 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Muffler & Pipe
Part Number: 91175656
Product Specifications
- Other Name: Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Muffler & Pipe
Part Number: 91173410
Product Specifications
- Other Name: Muffler, Exhaust; Muffler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Muffler & Pipe
Part Number: 91173409
Product Specifications
- Other Name: Muffler, Exhaust; Muffler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Exhaust Pipe
Part Number: 30027730
Product Specifications
- Other Name: Pipe, Exhaust Pipe; Exhaust Y Pipe; Front Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Tracker | Base, LT, ZR2 | 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Front Pipe
Part Number: 30025017
Product Specifications
- Other Name: Converter, Catalytic Converter; Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chevrolet Tracker | Base, LT, ZR2 | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Tracker Exhaust Pipe
Part Number: 30021698
Product Specifications
- Other Name: Pipe; Front Pipe; Pipe, Catalytic Converter; Pipe, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS

Chevrolet Tracker Exhaust Pipe

Our website offers an extensive catalog of genuine Chevrolet Tracker Exhaust Pipe at unbeatable prices. Every OEM Chevrolet Tracker Exhaust Pipe comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Tracker Exhaust Pipe Parts Questions & Experts Answers

Muffler & Pipe
91175657
Q: How to service and repair the Exhaust Pipe on Chevrolet Tracker?
A: The Exhaust Pipe servicing needs the vehicle lift along with vehicle support before beginning the work. Two bolts securing the Exhaust Manifold front pipe/twc assembly need removal so the electrical ho2s2 connector from the heated Oxygen Sensor can be unconnected. Take off two nuts which will lead to separating the front pipe/twc assembly from its place on the resonator/muffler/tail pipe assembly. Subsequently detach the hanger that supports the twc. You should first remove the front pipe/twc assembly from the vehicle before cleaning both the gasket and seal mating surfaces. The installation of any new exhaust system component requires using exclusive fresh gaskets and seals. Position the front pipe/twc assembly to its vehicle seating and use a hanger for twc support. Screw two nuts into the front pipe/twc assembly to join it with the resonator/muffler/tail pipe assembly but refrain from full bolting them at this stage. Secure the electrical connector of heated Oxygen Sensor (HO2S2) before you attach the front pipe/twc assembly to the Exhaust Manifold using new seals. Then tighten its two bolts loosely. Translation of all system components comes before fastener tightening to minimize noise production and vibration. Use a torque wrench to secure the front pipe/twc assembly-to-exhaust manifold bolts at 50 nm (37 ft. Lbs.) as well as the front pipe/twc assembly-to-resonator/muffler/tail pipe assembly nuts at 35 nm (26 ft. Lbs.). Finally, lower the vehicle.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Exhaust Pipe by Years

2004 2003 2002 2001 2000 1999 1998