How to service and repair the LH Wheel Seal on Chevrolet Tracker?

First service and repair operations for the left side axle seal must start by safely elevating the vehicle with supporting stands. Set a drain pan in the right spot beneath the rear axle housing before uninstalling both the axle housing oil level/filler plug and rear axle drain plug from the rear axle housing to drip out all its oil. Start by first removing the wheel assembly before you proceed to detach the Brake Drum and separated the Axle Shaft from the rear axle housing. The rear Axle Shaft inner oil seal removal requires Axle Shaft seal remover (J 26941) and slide hammer (J 23907). Inspect the protocol for damage when extracting the rear Axle Shaft inner oil seal from the rear axle housing. If damage exists, a replacement is needed. Install the new rear Axle Shaft inner oil seal into the rear axle housing through the use of the Axle Shaft inner oil seal installer (J 29039) and driver handle (J 8092). Before sealing, apply gm p/n 1051344 wheel bearing lubricant or equivalent to the seal lip. After sealing the oil drain plug with gm p/n 12346004, install the rear Axle Shaft then reinstall the Brake Drum and tire and wheel assembly. Before installing the rear axle housing drain plug apply gm p/n 12346004 (Canadian P/N 10953480) along its threaded section and torque the plug to 25 nm (18 ft. Lbs.). The rear axle housing requires 2.2 liters (4.6 pints) of 80w-90 gl5 lubricant gm p/n 12345977 (Canadian P/N 10953482) until reaching the oil level of the rear axle housing level/filler plug hole before installing the plug using 43 nm (32 ft. Lbs.) torque. Lower the vehicle before removing the drain pan that rests at the base of the rear axle housing.

OEM Chevrolet Tracker Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Wheel Seals found

View related parts
Chevrolet Tracker Bearing Seal
Part Number: 96057745
$2.12 MSRP: $17.00
You Save: $14.88 (88%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Wheel Bearing Oil; Outer Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Bearing Oil Seal
Part Number: 96057743
$13.96 MSRP: $28.02
You Save: $14.06 (51%)
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Bearing; Wheel Seal; Axle Seal; Spindle Seal; Outer Seal; Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Axle Seals
Part Number: 91177648
$7.34 MSRP: $22.53
You Save: $15.19 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Drive Axle Inner Shaft; Axle Seal; Seal, Front Axle
- Position: Front Inner
- Replaces: 96057740
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Axle Seal, Rear
Part Number: 30023667
$12.60
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Wheel Bearing Oil; Wheel Seal; Inner Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Backing Plate Retainer
Part Number: 96058773
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Axle Seal
Part Number: 96057748
Product Specifications
- Other Name: Seal, Front Wheel Drive Shaft Inner; Wheel Seal; Inner Seal; Seal, Steering Knuckle
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Inner Seal
Part Number: 96057747
Product Specifications
- Other Name: Seal, Front Wheel Inner Bearing; Wheel Seal; Axle Seal; Bearing Oil Seal; Spindle Seal; Seal; Seal, Front Wheel Bearing
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Axle Seal
Part Number: 96057746
Product Specifications
- Other Name: Seal, Front Wheel Drive Shaft Outer; Wheel Seal; Outer Seal; Seal, Steering Knuckle
- Position: Front Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Bearing Seal
Part Number: 96057738
Product Specifications
- Other Name: Seal, Rear Wheel Bearing Oil; Inner Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS

Chevrolet Tracker Wheel Seal

Our website offers an extensive catalog of genuine Chevrolet Tracker Wheel Seal at unbeatable prices. Every OEM Chevrolet Tracker Wheel Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Tracker Wheel Seal Parts Questions & Experts Answers

Axle Seal, Rear
30023667
Q: How to service and repair the LH Wheel Seal on Chevrolet Tracker?
A: First service and repair operations for the left side axle seal must start by safely elevating the vehicle with supporting stands. Set a drain pan in the right spot beneath the rear axle housing before uninstalling both the axle housing oil level/filler plug and rear axle drain plug from the rear axle housing to drip out all its oil. Start by first removing the wheel assembly before you proceed to detach the Brake Drum and separated the Axle Shaft from the rear axle housing. The rear Axle Shaft inner oil seal removal requires Axle Shaft seal remover (J 26941) and slide hammer (J 23907). Inspect the protocol for damage when extracting the rear Axle Shaft inner oil seal from the rear axle housing. If damage exists, a replacement is needed. Install the new rear Axle Shaft inner oil seal into the rear axle housing through the use of the Axle Shaft inner oil seal installer (J 29039) and driver handle (J 8092). Before sealing, apply gm p/n 1051344 wheel bearing lubricant or equivalent to the seal lip. After sealing the oil drain plug with gm p/n 12346004, install the rear Axle Shaft then reinstall the Brake Drum and tire and wheel assembly. Before installing the rear axle housing drain plug apply gm p/n 12346004 (Canadian P/N 10953480) along its threaded section and torque the plug to 25 nm (18 ft. Lbs.). The rear axle housing requires 2.2 liters (4.6 pints) of 80w-90 gl5 lubricant gm p/n 12345977 (Canadian P/N 10953482) until reaching the oil level of the rear axle housing level/filler plug hole before installing the plug using 43 nm (32 ft. Lbs.) torque. Lower the vehicle before removing the drain pan that rests at the base of the rear axle housing.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Wheel Seal by Years

2004 2003 2002 2001 2000 1999 1998