How to replace the lower control arm ball joint on Chevrolet Uplander?

You need to take out the lower Control Arm to replace its Ball Joint. Place the lower Control Arm in a heavy tightening tool before drilling away the ball stud rivets. Hammer and drift punch methods allow you to remove rivets from the lower Control Arm while extracting the ball stud. Place the ball stud onto the lower Control Arm with new bolts facing down towards the opposite end of the ball stud. The bolt may be refitted but needs new parts if surfaces and fasteners show rust plus it hits resistance less than 2 n.m (18 lb in) while finalizing installation. Connect the new ball stud nuts and tighten them to 50 lb ft torque. Reinsert the whole Control Arm structure last.

OEM Chevrolet Uplander Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
Chevrolet Uplander Ball Joint
Part Number: 88965333
$50.97 MSRP: $80.93
You Save: $29.96 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Lower Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 88955451, 22157089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Chevrolet Uplander Ball Joint

Our website offers an extensive catalog of genuine Chevrolet Uplander Ball Joint at unbeatable prices. Every OEM Chevrolet Uplander Ball Joint comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Uplander Ball Joint Parts Questions & Experts Answers

Ball Joint
88965333
Q: How to replace the lower control arm ball joint on Chevrolet Uplander?
A: You need to take out the lower Control Arm to replace its Ball Joint. Place the lower Control Arm in a heavy tightening tool before drilling away the ball stud rivets. Hammer and drift punch methods allow you to remove rivets from the lower Control Arm while extracting the ball stud. Place the ball stud onto the lower Control Arm with new bolts facing down towards the opposite end of the ball stud. The bolt may be refitted but needs new parts if surfaces and fasteners show rust plus it hits resistance less than 2 n.m (18 lb in) while finalizing installation. Connect the new ball stud nuts and tighten them to 50 lb ft torque. Reinsert the whole Control Arm structure last.

Related Chevrolet Uplander Parts

Browse Chevrolet Uplander Ball Joint by Years

2008 2007 2006 2005