How to replace the steering knuckle on Chevrolet Uplander?

Start the Steering Knuckle replacement process by lifting the vehicle before securely supporting it. Start by removing the tire wheel assembly then proceed to detach both the front wheel drive shaft bearing. Break the front lower control arm ball stud loose from its position. The steering linkage and tie rod puller (J 24319-B) serves to disconnect the outer Tie Rod End from the Steering Knuckle assembly. Scribe the strut to the knuckle before removing the bolts connecting the strut to the knuckle allowing removal of the knuckle from the vehicle. Before the knuckle reinstatement place it back onto the vehicle and bolt it to the knuckle using 112 n.m (83 lb ft). After reconnecting the outer tie rod to the Steering Knuckle you can attach the front lower control arm ball stud to the knuckle followed by installing the front wheel drive shaft bearing. Place the tire and wheel assembly back in position then lower the vehicle.

OEM Chevrolet Uplander Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
Chevrolet Uplander Knuckle, Driver Side
Part Number: 23127629
$281.50 MSRP: $442.93
You Save: $161.43 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Knuckle, Passenger Side
Part Number: 22990753
$268.07 MSRP: $421.79
You Save: $153.72 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Knuckle, Rear Passenger Side
Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Knuckle, Rear Driver Side
Part Number: 18060684
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

Chevrolet Uplander Steering Knuckle

Our website offers an extensive catalog of genuine Chevrolet Uplander Steering Knuckle at unbeatable prices. Every OEM Chevrolet Uplander Steering Knuckle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Uplander Steering Knuckle Parts Questions & Experts Answers

Knuckle, Driver Side
23127629
Q: How to replace the steering knuckle on Chevrolet Uplander?
A: Start the Steering Knuckle replacement process by lifting the vehicle before securely supporting it. Start by removing the tire wheel assembly then proceed to detach both the front wheel drive shaft bearing. Break the front lower control arm ball stud loose from its position. The steering linkage and tie rod puller (J 24319-B) serves to disconnect the outer Tie Rod End from the Steering Knuckle assembly. Scribe the strut to the knuckle before removing the bolts connecting the strut to the knuckle allowing removal of the knuckle from the vehicle. Before the knuckle reinstatement place it back onto the vehicle and bolt it to the knuckle using 112 n.m (83 lb ft). After reconnecting the outer tie rod to the Steering Knuckle you can attach the front lower control arm ball stud to the knuckle followed by installing the front wheel drive shaft bearing. Place the tire and wheel assembly back in position then lower the vehicle.