How to replace the engine oil cooler on Chevrolet Uplander?

The cooling system drainage process starts as the first step toward Engine Oil Cooler replacement. Start by placing a drain pan under the Oil Filter followed by removal of the Oil Filter after removing the radiator air baffle. Use a screwdriver to loosen the outlet hose clamp on the Oil Cooler before removing the outlet hose from its connection. Grease the inlet hose clamp at the engine before you remove the hose from the engine fitting. You need to disconnect the Oil Cooler connector then remove the Oil Cooler and its gasket from the Oil Filter adapter. To install a new Oil Cooler connect the inlet hose to the cooler and tighten the clamp around it. Fit a new Oil Cooler gasket onto the Oil Cooler and join the Oil Cooler assembly to the Oil Filter adapter while tightening the connector to 25 n.m (18 lb ft). The first step involves installing the engine fitting end of the Oil Cooler inlet hose and clamping it into place. Then attach the outlet hose to its Oil Cooler fitting. Fasten the new Oil Filter with 30 n.m torque (22 lb ft) before removing the Oil Filter drain container. Reinstall the radiator air baffle after filling the cooling system and performing any required crankcase fluid addition.

OEM Chevrolet Uplander Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Coolers found

View related parts
Chevrolet Uplander Oil Cooler Part Number: 12610723
$245.09 MSRP: $366.34
You Save: $121.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Replaces: 12593171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Oil Cooler Part Number: 12597310
$234.94 MSRP: $313.25
You Save: $78.31 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Replaces: 12581271
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS

Chevrolet Uplander Oil Cooler

Want to cut long-term maintenance and repair costs? Choose OEM Oil Cooler. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Uplander parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Uplander Oil Cooler includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Uplander Oil Cooler is a part which improves greatly the durability and efficiency of the Chevrolet Uplander, a minivan made from 2005 to 2009. This modern Oil Cooler is designed with oil-to-water heat exchanger that help in regulating the viscosity and temperature of the engine oil which is significant with regards to the traversing ability of the Uplander particularly over extremes as can be evidenced by towing. Chevrolet Uplander perfectly cooperates with different models, so the Oil Cooler is one of the best additions if you care about the performance and your engine's health. Preventing the overheating of the engine oil, the Oil Cooler does not only add years to the periods between oil changes but also contributes to the safety of the automobile and the exclusion of the probability of the breakdown of the engine. Some of the Chevrolet Uplander's implementations consist of build up and key features of car making that gives significant market edge; it has fast heat-up capacity, which is rare in most cars; This car's body has been made in such a manner that it cannot easily clog or rust. These attributes make the Oil Cooler a reliable product to use in the long run which makes it certain that Uplander owners will delighted to use it. Being a performance enhancer and safety feature, the Chevrolet Uplander Oil Cooler is among the most significant components for the automobile owners wishing to enhance their vehicle's performance and use.

Chevrolet Uplander Oil Cooler Parts and Q&A

Oil Cooler
12610723
Q: How to replace the engine oil cooler on Chevrolet Uplander?
A:
The cooling system drainage process starts as the first step toward Engine Oil Cooler replacement. Start by placing a drain pan under the Oil Filter followed by removal of the Oil Filter after removing the radiator air baffle. Use a screwdriver to loosen the outlet hose clamp on the Oil Cooler before removing the outlet hose from its connection. Grease the inlet hose clamp at the engine before you remove the hose from the engine fitting. You need to disconnect the Oil Cooler connector then remove the Oil Cooler and its gasket from the Oil Filter adapter. To install a new Oil Cooler connect the inlet hose to the cooler and tighten the clamp around it. Fit a new Oil Cooler gasket onto the Oil Cooler and join the Oil Cooler assembly to the Oil Filter adapter while tightening the connector to 25 n.m (18 lb ft). The first step involves installing the engine fitting end of the Oil Cooler inlet hose and clamping it into place. Then attach the outlet hose to its Oil Cooler fitting. Fasten the new Oil Filter with 30 n.m torque (22 lb ft) before removing the Oil Filter drain container. Reinstall the radiator air baffle after filling the cooling system and performing any required crankcase fluid addition.