How to replace or repair an emblem/nameplate on the liftgate on Chevrolet Venture?

The first step when installing a new liftgate emblem is to cover the mounting area with tape and mark surface alignment using additional tape. Warm the emblem/nameplate with J 25070 Heat Gun at 152 mm (6 in) distance for 30 seconds while rotating the tool in a circular pattern. Use a plastic flatblade tool to properly take off the emblem/nameplate. You can use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) for body panels and a lint-free cloth with VMP naphtha mixture or 50/50 isopropyl alcohol and water for plastic panels. Wipe the installation area with the same cloth and solvent mixture before completely drying it. Place tape at the chosen installation site if there are no markings present. Affix the CHEVROLET, VENTURE, PONTIAC VERSATRAK AWD, WB, THUNDER, OLDSMOBILE, and SILHOUETTE emblems/nameplates in their correct dimensions when the surface temperature reaches 27-41°C (80-105°F) during J 25070 Heat Gun (J 25070) use and keep the emblem/nameplate temperature at 29-32°C (85-90°F). Put the emblem/nameplate onto its required placement while matching its marks and apply force to get a solid bond. After that put the emblem/nameplate on by pressing it evenly into the attachment spot.

OEM Chevrolet Venture Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Emblems found

View related parts
Chevrolet Venture Nameplate, Gold, Front Part Number: 10342806
$3.02 MSRP: $42.67
You Save: $39.65 (93%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door
- Position: Front
- Replaces: 10328754, 88897311
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Emblem, Outer Part Number: 15008298
$23.61
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Nameplate; Cab & Load Carrier Outer Side Decoration; Front Side Door; Rear Quarter Panel
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Venture | LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Nameplate, Silver, Front Part Number: 10328755
Product Specifications
- Other Name: Emblem, Front Side Door
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Emblem, Outer Part Number: 15995664
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Nameplate; Plate Assembly, Front Side Door; Plate, Fuel Door & Body Side
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Venture | LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Emblem, Front Part Number: 15008297
Product Specifications
- Other Name: Plate, Front Side Door Name; Nameplate; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate, Rear Quarter Panel
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Venture | LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Emblem, Front Part Number: 10435542
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Nameplate, Black Part Number: 10328757
Product Specifications
- Other Name: Emblem; Emblem,Rear End Panel And Tailgate; Emblem, Front Side Door
- Position: Front
- Replaces: 88893535
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Emblem, Front Part Number: 10252793
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

Chevrolet Venture Emblem

Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Venture parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Venture Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Venture Emblem Parts Questions & Experts Answers

Emblem, Front
15008297
Q: How to replace or repair an emblem/nameplate on the liftgate on Chevrolet Venture?
A:
The first step when installing a new liftgate emblem is to cover the mounting area with tape and mark surface alignment using additional tape. Warm the emblem/nameplate with J 25070 Heat Gun at 152 mm (6 in) distance for 30 seconds while rotating the tool in a circular pattern. Use a plastic flatblade tool to properly take off the emblem/nameplate. You can use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) for body panels and a lint-free cloth with VMP naphtha mixture or 50/50 isopropyl alcohol and water for plastic panels. Wipe the installation area with the same cloth and solvent mixture before completely drying it. Place tape at the chosen installation site if there are no markings present. Affix the CHEVROLET, VENTURE, PONTIAC VERSATRAK AWD, WB, THUNDER, OLDSMOBILE, and SILHOUETTE emblems/nameplates in their correct dimensions when the surface temperature reaches 27-41°C (80-105°F) during J 25070 Heat Gun (J 25070) use and keep the emblem/nameplate temperature at 29-32°C (85-90°F). Put the emblem/nameplate onto its required placement while matching its marks and apply force to get a solid bond. After that put the emblem/nameplate on by pressing it evenly into the attachment spot.