OEM Chevrolet Venture Parking Brake Shoe

Chevrolet Venture Parking Brake Shoe Parts and Q&A

• Brake Shoes
  18044586
  Q: How to replace the Parking Brake Shoe on Chevrolet Venture?

  A:

  The replacement of parking brake shoes begins with lifting the vehicle before supporting it. Next remove both rear tire and wheels. Start by relieving tension from the park brake system at the equalizer assembly before proceeding to remove the rear caliper bracket together with the rear rotor. The first step involves disconnecting the rear park brake cable from its bracket position at the wheel as well as removing the park brake cable return spring attached to the park brake actuator and bracket located at the rear wheel. To continue with the procedure you must separate the rear hub from other components consisting of the rear hub and backing plate alongside the park brake cable bracket and park brake actuator assembly. Two retainers and a park brake cable bracket need removal from the park brake actuator before setting the rear hub to the side. First separate the park brake shoe from the actuator while removing the pair components from the backing plate. The installation process starts with combining the park brake shoe with the actuator and placing this combination on the backing plate. Establish the park brake shoe with actuator along with backing plate over the rear hub before installing the park brake cable bracket and the two retainers. Replace the rear hub assembly in position before you connect the rear park brake cable to its bracket at the rear wheel and affix the park brake cable return spring to both the actuator and bracket at the rear wheel. Start by installing the rear rotor after which you should add the rear caliper bracket before putting back the rear wheels and tires. Complete the procedure by readjusting the park brake system followed by lowering the vehicle.
• Brake Shoes, Rear
  19152686
  Q: How to service and repair the parking brake shoe on Chevrolet Venture?

  A:

  The service and repair work on the Parking Brake Shoe begins by setting the park brake control pedal to its full up position. Rise the vehicle for servicing while checking that both park brake cable actuator levers rest in the full release (up) stage; adjust the park brake cable if necessary. After removal of the tire wheel the next step entails removing the rear Brake Caliper Bracket together with the bracket and rotor from the rear brake assembly. Loosen the park brake adjuster nut until the shoethat controls the brake has no pressure and then remove the wheel bearing hub assembly. After detaching the backing plate you should disconnect the retaining clip from the park brake shoe. Place the park brake actuator retainer as it should be mounted to the park brake actuator. Begin by removing the park brake actuator retainer from the park brake actuator while making sure the park brake shoe joins its proper place on the retainer for installation. Reinstall both the park brake shoe to the support plate followed by the wheel bearing/hub assembly. After adjusting the park brake shoe workers must install the rear brake rotor and rear Brake Caliper Bracket with its attached rear brake caliper. You must finish by adjusting the park brake cable before putting on the tire and wheel then lowering the vehicle.