What Tools Are Required to Service and Repair the Brake Disc, and What Steps Should Be Followed to Ensure Proper Refinishing on Chevrolet Venture?

The Brake Disc needs j 41013 rotor resurfacing kit and j 42450-a Wheel Hub resurfacing kit to perform services and repairs. Before refinishing check the disc thickness to ensure it will still pass the needed specification after the work finishes. You need to refinish brake discs only when their thickness differs too much from defined limits plus shows intense corrosion or pitting and extensive blue discoloration beyond specified points. Use j 42450-a to remove hub/axle flange rust and corrosion before cleaning Brake Disc mating and mounting surfaces with j 41013. Check both surface ends to find and remove outside objects. Install the Brake Disc to the brake lathe as described by the manufacturer while keeping all attachments free of dirt. Set the tools against disc friction surfaces while the lathe spins and verify tool placement by inspecting the marks on the disc. If necessary, re-mount the disc. Use the lathe as explained in the manufacturer manual while checking the disc thickness after each cut. The disc must be replaced when refinishing shows its thickness beyond the minimum allowed limits. Stick to the recommended speed when sanding the friction surface using non-directional sanding media either 120 aluminum oxide sandpaper or 150 sanding blocks. Use denatured alcohol or brake cleaner to clean torque surfaces and take the lateral runout measurement of the disc parts to modify alignment when the reading deviates from standards.

OEM Chevrolet Venture Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Discs found

View related parts
Chevrolet Venture Rotor, Rear Part Number: 19149233
$52.07 MSRP: $188.93
You Save: $136.86 (73%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly, Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 18060646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Rotor Part Number: 19303830
$57.91 MSRP: $159.19
You Save: $101.28 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Replaces: 18060232, 25956847, 88965647, 18021354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Venture | LS, LT, Plus | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Brake Rotor Part Number: 89047768
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 10434246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Brake Rotor, Front Part Number: 19303831
$34.00 MSRP: $139.00
You Save: $105.00 (76%)
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18021359, 18060233
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

Chevrolet Venture Brake Disc

Want to cut long-term maintenance and repair costs? Choose OEM Brake Disc. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Venture parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Venture Brake Disc includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Brake Disc is an important component for the Chevrolet Venture made and remade vehicles because it was manufactured and used from the year 1997 to 2005. The Brake Disc kit in question is intended for use with different Venture cars, including Base, LS, and LT models that will improve the braking performance and, therefore, increase vehicles' safety. The components usually come in high standard brake discs and pads that are made from some of the optimal friction materials in the market today. A requirement comes in when the brake pads are worn out; replacing them would facilitate effective braking and the process is highly enhanced by the hardware components in the kit including clips and springs. Indeed, the Brake Disc goes beyond revamping the braking mechanism by enhancing the ride quality due to its compatibility of the four-speed automatic transmission of the Venture. In particular, the Brake Disc kit being an auto spare-part distinguishes itself in the automotive market since it targets safe and efficient operation in any cars; thus, is an industry favorite among ordinary and performance car users. Being one of the Chevrolet Venture branded spare auto parts, the Brake Disc is highly reliable, making it a must-have for any Chevrolet Venture owner who desires to improve their vehicle's brake system and ensure safety during use.

Chevrolet Venture Brake Disc Parts Questions & Experts Answers

Rotor
19303830
Q: What Tools Are Required to Service and Repair the Brake Disc, and What Steps Should Be Followed to Ensure Proper Refinishing on Chevrolet Venture?
A:
The Brake Disc needs j 41013 rotor resurfacing kit and j 42450-a Wheel Hub resurfacing kit to perform services and repairs. Before refinishing check the disc thickness to ensure it will still pass the needed specification after the work finishes. You need to refinish brake discs only when their thickness differs too much from defined limits plus shows intense corrosion or pitting and extensive blue discoloration beyond specified points. Use j 42450-a to remove hub/axle flange rust and corrosion before cleaning Brake Disc mating and mounting surfaces with j 41013. Check both surface ends to find and remove outside objects. Install the Brake Disc to the brake lathe as described by the manufacturer while keeping all attachments free of dirt. Set the tools against disc friction surfaces while the lathe spins and verify tool placement by inspecting the marks on the disc. If necessary, re-mount the disc. Use the lathe as explained in the manufacturer manual while checking the disc thickness after each cut. The disc must be replaced when refinishing shows its thickness beyond the minimum allowed limits. Stick to the recommended speed when sanding the friction surface using non-directional sanding media either 120 aluminum oxide sandpaper or 150 sanding blocks. Use denatured alcohol or brake cleaner to clean torque surfaces and take the lateral runout measurement of the disc parts to modify alignment when the reading deviates from standards.