Make sure this part fits

GM 19149233
Rotor, Rear

2001-2007 GM

Customer Questions & Expert Answers (13)
GM 19149233 Rotor, Rear
  • Part Description
    Rotor Assembly, Rear Brake; Brake Rotor
  • Position
    Rear
  • Replaces
    18060646
  • Manufacturer
    General Motors
Make sure this part fits
$52.07 MSRP: $188.93
You Save: $136.86 (73%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19149233 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19149233 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front brake rotor for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Ensure the vehicle is raised and suitably supported.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    How do you compress the brake caliper piston for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Use a C-clamp (J 42450-A) over the top of the brake caliper against the back of the outboard brake pad, tightening it until the brake caliper piston pushes into the bore enough to slide the caliper off the rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done after removing the protective coating for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the first step to replace the front brake rotor for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Ensure the protective coating is removed from the friction surfaces of the new rotor using denatured alcohol or an equivalent, and wipe the surface clean with cloths, avoiding gasoline or kerosene.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done before refinishing the rotor for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Clean any rust or contaminants from the hub/axle flange and brake rotor mating surfaces using the Wheel Hub Resurfacing Kit (J42450-A) and the Rotor Resurfacing Kit (J41013).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the procedure for installing the brake caliper bracket and caliper for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Install the brake caliper bracket with the brake caliper, ensuring the threads on the caliper bracket bolts and the mounting holes in the knuckle are clean and inspected.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the first step to replace the rear brake rotor for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Begin by raising and supporting the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done after cleaning the hub/axle flange for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Use the Rotor Resurfacing Kit (J 41013) to clean the brake rotor's mating and mounting surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be checked while the lathe is running for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Bring in the cutting tools until they contact the rotor friction surfaces, checking the witness mark to confirm proper mounting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    How can a non-directional finish be achieved for the 2002 Chevrolet Venture? Posted by Customer
    A:
    A non-directional finish can be achieved by adhering to the recommended speed settings and applying the finish with 120 grit aluminum oxide sandpaper or with a sanding block and 150 grit aluminum oxide sandpaper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    How do you install the brake rotor for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Install the brake rotor to the hub/axle flange using the matchmark for proper orientation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the first step to replace the front brake rotor for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rotor, Rear 19149233 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19149233 Rotor, Rear is available in the market under the name GM Brake Disc. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19149233 Rotor, Rear fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 19149233 maintains top performance when functioning as the Rotor Assembly, Rear Brake; Brake Rotor unit at its Rear. The component 19149233 is constructed from durable material and its dimensions span 4.2 x 15.6 x 14.8 inches while weighing 14.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rotor, Front And Rear Wheel Brake. The part 19149233 has available replacement options 18060646. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.