Make sure this part fits

GM 89047768
Brake Rotor

2001-2006 GM

Customer Questions & Expert Answers (12)
GM 89047768 Brake Rotor
  • Part Description
    Rotor Assembly, Front Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Replaces
    10434246
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89047768 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89047768 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done to the wheel hub flange for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Clean the wheel hub flange with the Wheel Hub/Flange Resurfacing Kit (J42450-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the next step after measuring the LRO for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the brake caliper and bracket assembly to the suspension knuckle, followed by the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the next step after supporting the caliper and bracket for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Proceed to remove the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done to prevent damage to the hydraulic flexible brake hose for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic's wire.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What are the final steps after installing the brake components for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Install the tire and wheel, lower the vehicle, fill the master cylinder to the proper level, and if a new or refinished brake rotor was installed, burnish the brake pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done during the refinishing process for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Refinish the rotor according to the lathe manufacturer's instructions, inspecting the thickness after each cut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the first step to replace the rear brake rotor for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Begin by raising and supporting the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    How do you compress the brake caliper piston for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Install a C-clamp over the body of the brake caliper, positioning the ends against the rear of the caliper body and the outboard disc brake pad, then use the C-clamp to compress the piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done after applying the finish for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Clean the friction surfaces with denatured alcohol or an approved brake cleaner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the final step after removing the rotor from the lathe for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Measure the assembled lateral runout (LRO) to ensure optimal disc brake performance, adjusting as necessary if the measurement exceeds specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be checked while the lathe is running for the 2002 Chevrolet Venture? Posted by Customer
    A:
    The cutting tools should be brought in to contact the rotor friction surfaces, and the witness mark should be checked to confirm proper mounting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Rotor 89047768 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89047768 Brake Rotor is available in the market under the name GM Brake Disc. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89047768 Brake Rotor fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 89047768 maintains top performance when functioning as the Rotor Assembly, Front Brake; Disc Brake Hardware Kit unit at its Front. The component 89047768 is constructed from durable material and its dimensions span 13.4 x 12.8 x 3.8 inches while weighing 15.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rotor; Rotor, Front And Rear Wheel Brake. The part 89047768 has available replacement options 10434246. Each vehicle needs 2 units of the part marked as SKU 89047768. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.