ChevyParts
My Garage
My Account
Cart
OEM GMC C2500 Door Lock Actuator
Power Door Lock Actuator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
24 Door Lock Actuators found
GMC C2500 Lock, Rear
Part Number: 16631628$200.30 MSRP: $299.46You Save: $99.16 (34%)Ships in 1-2 Business Days
GMC C2500 Lock, Front Passenger Side
Part Number: 16631626$110.12 MSRP: $163.90You Save: $53.78 (33%)
| Page 1 of 2 |Next >
1-20 of 24 Results
GMC C2500 Door Lock Actuator
Our website offers an extensive catalog of genuine GMC C2500 Door Lock Actuator at unbeatable prices. Every OEM GMC C2500 Door Lock Actuator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC C2500 Door Lock Actuator Parts Questions & Experts Answers
- Q: How to replace the rear side door lock actuator on GMC C2500?A: The process to replace the rear side door lock actuator begins with raising the window followed by panel and water deflector removal. Detach both the inside door lock rod from its retention on the handle retainer clip as well as the manual door lock rod from its retention on door retainer clips. To detach the outside handle rod retainer use a screwdriver to remove the rubber plug along with the rod without disconnection. The door lock actuator should have its bolts removed to extract it along with control rods as one complete assembly. First disconnect the door lock actuator electrical connector then separate the control rods when equipment gives permission. First attach control rods to the assembly then connect electrical connectors to the door lock actuator if the system is equipped. After installing the door lock actuator to its position on the door structure you must connect the outside door handle control rod followed by attachment of the cylinder lock rod. Secure the door lock actuator using bolts that need to be tightened to 9 N.m (80 lb in). Link the door retainer clips together with the manual door lock and connect the inside door lock rod to handle retainer clip. Lastly you should install the water deflector and door trim panel while inspecting the operational function of all linked components.
