Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15724158
Link, Passenger Side

1988-2000 GM

Customer Questions & Expert Answers (12)
GM 15724158 Link, Passenger Side
GM 15724158 Link, Passenger Side
GM 15724158 Link, Passenger Side
GM 15724158 Link, Passenger Side
  • Part Description
    Latch Assembly-Pick Up Box End Gate (W/Cable); Trunk Latch; Door Lock
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15724158 Link, Passenger Side is Ref No. 8 in the diagram below

    1996 Chevy K3500 Link, Passenger Side Diagram for 15724158
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15724158

  • Vehicle Fitment

    Year Make Model Trim Engine
    1988-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-2000 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-2000 Chevrolet C3500Base, Cheyenne, LS, Scottsdale, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-1999 Chevrolet K1500Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1988-2000 Chevrolet K2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-2000 Chevrolet K3500Base, Cheyenne, LS, Scottsdale, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-1999 GMC C1500Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1988-2000 GMC C2500Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-2000 GMC C3500Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-1999 GMC K1500Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15724158 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15724158 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear trunk latch on Chevrolet K3500? Posted by Customer
    A:
    Begin replacement by taking off the trim panel then unscrewing both bolts of the latch assembly cover. Additionally, withdraw the latch assembly seal before proceeding. Identify the latch assembly spot on the liftgate and unscrew its bolts to take out the entire assembly from the gate. Place both the latch assembly and seal onto the liftgate and position them according to the marks on the inner metal panel. Fasten the lock rods back to the latch system while keeping the fastener notice in service precautions in mind. Fasten the latch assembly bolts until you reach exactly 15 n.m of torque. Insert the latch assembly cover while keeping both gates shut for correct positioning then bolt the cover to the liftgate. Tighten cover bolts to 15 n.m (11 lb ft). Finally, reinstall the trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate latch on a pickup on GMC C3500? Posted by Customer
    A:
    Lower the endgate and take off the bolts that secure the handle or you can remove them first, then in order to install the new latch, raise the endgate and install the new latch then re-install the bolts until they are tight. Pry off the handle bezel gently while prying on the upper snap-in tabs and separate the linkage rods. Lower and support the endgate, then remove the cables from the side panel cable retainer bolts and the bolt the latch assembly which is stretched holds up. Disconnect the linkage rod and retract the latch assembly from the endgate. For installation, connect the linkage rod to the latch assembly installing the latch assembly onto the vehicle and make sure to follow the Fastener Notice in Service Precautions. Mount the latch assembly bolts and tighten them to 25 N.m (18 lb ft). Attach the cables at each side of the endgate to the side panel cable retainer bolts, link the linkage rods, lift the end gate, install the end gate handle bezel, and lastly tighten the handle bolts to 25N m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate latch on a pickup on GMC C2500? Posted by Customer
    A:
    Lower the endgate and take off the bolts that secure the handle or you can remove them first, then in order to install the new latch, raise the endgate and install the new latch then re-install the bolts until they are tight. Pry off the handle bezel gently while prying on the upper snap-in tabs and separate the linkage rods. Lower and support the endgate, then remove the cables from the side panel cable retainer bolts and the bolt the latch assembly which is stretched holds up. Disconnect the linkage rod and retract the latch assembly from the endgate. For installation, connect the linkage rod to the latch assembly installing the latch assembly onto the vehicle and make sure to follow the Fastener Notice in Service Precautions. Mount the latch assembly bolts and tighten them to 25 N.m (18 lb ft). Attach the cables at each side of the endgate to the side panel cable retainer bolts, link the linkage rods, lift the end gate, install the end gate handle bezel, and lastly tighten the handle bolts to 25N m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear trunk latch on GMC C3500? Posted by Customer
    A:
    Begin replacement by taking off the trim panel then unscrewing both bolts of the latch assembly cover. Additionally, withdraw the latch assembly seal before proceeding. Identify the latch assembly spot on the liftgate and unscrew its bolts to take out the entire assembly from the gate. Place both the latch assembly and seal onto the liftgate and position them according to the marks on the inner metal panel. Fasten the lock rods back to the latch system while keeping the fastener notice in service precautions in mind. Fasten the latch assembly bolts until you reach exactly 15 n.m of torque. Insert the latch assembly cover while keeping both gates shut for correct positioning then bolt the cover to the liftgate. Tighten cover bolts to 15 n.m (11 lb ft). Finally, reinstall the trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the endgate latch on a pickup for the 2000 Chevrolet K3500? Posted by Customer
    A:
    First lower the endgate and loosen the handle bolts, then raise the endgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be done after removing the trim panel and other components for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Detach the inside door handle and lock control rods, followed by the lock assembly bolts and the outside door handle with its lock control rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What are the final steps after installing the new actuator for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Finally, reinstall the water deflector, trim panel, and access hole cover as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the door lock actuator for the 2000 GMC C2500? Posted by Customer
    A:
    Remove the bolts that secure the door lock actuator to the door and take out the door lock actuator along with the control rods as an assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be replaced after disassembly for the 2000 GMC C3500? Posted by Customer
    A:
    Replace the plastic retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the first step in the installation process for the 2000 GMC C2500? Posted by Customer
    A:
    Start by connecting the cable at the latch, followed by the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    What is the first step in the replacement process for the 2000 GMC C3500? Posted by Customer
    A:
    The first step is to remove the trim panel, water deflector, and access hole cover as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Link, Passenger Side 15724158 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15724158 Link, Passenger Side is available in the market under the name GM Door Lock, Door Lock Actuator, Tailgate Latch, Tailgate Lock, Trunk Latch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15724158 Link, Passenger Side fits certain Chevrolet C1500, C2500, C3500 models, as well as GMC C1500, C2500, C3500 models.
The original GM component designated by manufacturer part number 15724158 maintains top performance when functioning as the Latch Assembly-Pick Up Box End Gate (W/Cable); Trunk Latch; Door Lock unit at its Passenger Side. The component 15724158 is constructed from durable material and its dimensions span 8.1 x 5.4 x 5.4 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock; Latch; Latch, End Gate Lock. The part 15724158 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.