How to Replace a Seat Cushion Pad and Trim Cover on GMC C2500?

The process of replacing both the seat cushion trim cover and pad requires starting by removing the vehicle seat followed by stripping off the seat trim panel. The Seat Belt anchor must be detached first by unfastening its outboard nut so you can draw the belt out of the seat cushion. The seat cushion requires the removal of its two front underside nuts before unsnapping the lumbar cable to detach the power lumbar wire harness when equipped. After lifting the seat cushion from rear plastic holders the user must pull forward before removing the seat switch bezel and the lumbar actuator. To separate the Seat Cushion Pad from its trim cover you should unclip the seat trim from the seat cushion frame then use side motions for cautious separation. Take off the pad from the seat frame structure and its heater component if present on the seat. To set up installation proceed with seat cushion heater element installation if present before placing the Seat Cushion Pad to the seat cushion frame. The frame pad accepts the seat cushion cover by pulling it carefully while moving from the side before attaching the seat trim cover to the frame. Begin by installing the lumbar actuator and the seat switch bezel followed by placing the cushion on the rear plastic holders while pushing it toward the back. Treat the lumbar cable as a connection to the seat cushion under surface while dealing with the power lumbar harness when present. The two front nuts should be installed on the underside of the cushion studs before tightening them to 21 n.m (15 lb ft). After feeding the Seat Belt through the seat cushion you should install and tighten the outboard Seat Belt anchor nut to 53 n.m (39 lb ft). Finite measurement will complete the installation by repositioning the seat trim and securing the seat back within the vehicle.

OEM GMC C2500 Seat Cushion Pad

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Seat Cushion Pads found

View related parts
GMC C2500 Seat Cushion Pad, Passenger Side Part Number: 15665294
Product Specifications
- Other Name: Seat Cushion
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 GMC C2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Cushion Pad, Front Part Number: 15663191
Product Specifications
- Other Name: Frame, Front Seat Cushion (W/Pad); Seat Cushion
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Back Pad Part Number: 15662493
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 GMC C2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Cushion Pad, Front Part Number: 12548992
Product Specifications
- Other Name: Cushion, Front Seat; Seat Cushion; Pad, Seat Cushion
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Cushion Pad Part Number: 12381533
Product Specifications
- Other Name: Pad, Seat Cushion; Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Back Pad Part Number: 15633582
Product Specifications
- Other Name: Pad, Seat Back Cushion; Pad, A50 - Front Low Back Bucket (Except "D" Trim); Pad, A52 - Front Bench Seat Back ("D" Trim); Pad, Seat Cushion
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 GMC C2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Cushion Pad Part Number: 12549038
Product Specifications
- Other Name: Frame, Rear Seat; Seat Cushion; Pad, Seat Cushion
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Cushion Pad Part Number: 12387139
Product Specifications
- Other Name: Pad, Seat Cushion; Seat Cushion
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Cushion Pad, Front Part Number: 12387104
Product Specifications
- Other Name: Pad, Front Seat Cushion; Pad, Seat Cushion; Seat Cushion
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Back Pad, Driver Side Part Number: 12387102
Product Specifications
- Other Name: Pad, Driver Seat Back Cushion; Pad, A95: Front Bucket, Ae7: Front Split, At5: Rear Fold, Am7: Rear Fold, A52: Front Bench
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Cushion Pad, Driver Side Part Number: 12387100
Product Specifications
- Other Name: Pad, Driver Seat Cushion; Pad, Seat Cushion; Seat Cushion
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Pad Part Number: 12381594
Product Specifications
- Other Name: Pad, Seat Cushion
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Seat Back Pad, Front Part Number: 12381583
Product Specifications
- Other Name: Pad, A95 - Front Bucket Seat (High Back Recliner) ("B" Or "D" Trim); Pad: A95-FBS, 9J5-RBS, A50-LBS, Am7-RFS, A52-FB, Ae7-FSB, SBC
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

GMC C2500 Seat Cushion Pad

Want to cut long-term maintenance and repair costs? Choose OEM Seat Cushion Pad. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC C2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC C2500 Seat Cushion Pad includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC C2500 Seat Cushion Pad is a part often used in the interiors of different models of the GMC C2500 which is appreciated for its stability and power. This Seat Cushion Pad is durable, comfortable, and perfect for long drives and when fatigue and discomfort can really become an issue. New technical solutions are beaded cushions that facilitate the circulation of air to create a kind of gentle massage, and sheepskin coverings to warm the back and promote the circulation of warm blood to counteract notions of backache or overheating at one time for road trips that might last several days. The full size long pickup truck, GMC C2500, manufactured by General Motors Company and available from the year 1960 to the year 1998, is suitable for different trims such as Base, Deluxe, Custom, Sierra and Sierra Grande where the Seat Cushion Pad would be equally comfortable for all drivers who intend to use it. This product not only provides a comfortability advancement to the existing GMC C2500 cars, but also a strong factor regarding the safety of the drivers through the prevention of fatigue. The GMC C2500 Seat Cushion Pad is a striking product in the automotive industry because of these unique features and can be vouched for by any GMC C2500 owner who seeks an upgrade of the car's interior comfort. The GMC C2500 Seat Cushion Pad with its rivet and stud design reflect GMC's reliability and performance delivering great comfort in every ride.

GMC C2500 Seat Cushion Pad Parts and Q&A

Seat Cushion Pad, Driver Side
12387100
Q: How to Replace a Seat Cushion Pad and Trim Cover on GMC C2500?
A:
The process of replacing both the seat cushion trim cover and pad requires starting by removing the vehicle seat followed by stripping off the seat trim panel. The Seat Belt anchor must be detached first by unfastening its outboard nut so you can draw the belt out of the seat cushion. The seat cushion requires the removal of its two front underside nuts before unsnapping the lumbar cable to detach the power lumbar wire harness when equipped. After lifting the seat cushion from rear plastic holders the user must pull forward before removing the seat switch bezel and the lumbar actuator. To separate the Seat Cushion Pad from its trim cover you should unclip the seat trim from the seat cushion frame then use side motions for cautious separation. Take off the pad from the seat frame structure and its heater component if present on the seat. To set up installation proceed with seat cushion heater element installation if present before placing the Seat Cushion Pad to the seat cushion frame. The frame pad accepts the seat cushion cover by pulling it carefully while moving from the side before attaching the seat trim cover to the frame. Begin by installing the lumbar actuator and the seat switch bezel followed by placing the cushion on the rear plastic holders while pushing it toward the back. Treat the lumbar cable as a connection to the seat cushion under surface while dealing with the power lumbar harness when present. The two front nuts should be installed on the underside of the cushion studs before tightening them to 21 n.m (15 lb ft). After feeding the Seat Belt through the seat cushion you should install and tighten the outboard Seat Belt anchor nut to 53 n.m (39 lb ft). Finite measurement will complete the installation by repositioning the seat trim and securing the seat back within the vehicle.