Other Name: Module Assembly-Communication Interface (W/Mobile Telephone Transceiver); Module, Mobile Telephone Radio
Replaces: 19115463
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2006 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
GMC Canyon Body Control Module
Our website offers an extensive catalog of genuine GMC Canyon Body Control Module at unbeatable prices. Every OEM GMC Canyon Body Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Canyon Body Control Module Parts Questions & Experts Answers
Q: How to replace the Body Control Module (BCM) on GMC Canyon?
A: Turn off the Ignition Switch first before you can replace the Body Control Module (BCM). Start your task by taking off the right hinge pillar trim panel that covers this area. Take off the body wiring harness electrical connector from the bcm then detach the i/p wiring harness electrical connector. Free the connector hold-down clamp of the body wiring harness electrical connector from the bcm before detaching its two securing fasteners to the hinge pillar. Open the latch on the bcm to take it off the hinge pillar and move it away from the vehicle. Place the bcm unit into its vehicle position and fasten the integral tab onto the hinge pillar first. Secure the bcm using 2 fasteners then install the fastener connecting the body wiring harness to the bcm. Reconnect the body wiring harness to the bcm by plugging in both connector and connector then put back the right front hinge pillar trim panel. When installing a new bcm system program its settings as needed.