How to replace the tailgate latch and cable assembly on GMC Canyon?

Start by supporting the tailgate for replacement of the Tailgate Latch and cable assembly by removing the tailgate cover first. Use pliers to disconnect retaining clips from the handle before removing latch rods from their clips. The support cable must move forward into position to release itself from the tailgate striker bolt. Start by unbolting the latch/support cable assembly from the tailgate before removing the full latch assembly. Install the latch/support cable assembly to the tailgate while making sure the latch rod will properly face the Tailgate Handle. Screw in the bolts which fasten the latch assembly while tightening them to 25 nm (18 lb ft). Place the support cable back on the bolt head of the tailgate striker bolt and position both latch rods inside their retaining clips before connecting the clips to the Tailgate Handle. Put back the tailgate cover before pulling the tailgate closed.

How to Service and Repair the Tailgate Latch on GMC Canyon?

After opening and supporting the tailgate proceed by removing the tailgate cover. The tailgate latch rods require removal from their retaining clips after disconnecting the retaining clip connectors. The support cable must slide off the tailgate striker bolt head before you remove the bolts that connect the latch/support cable assembly into the tailgate structure. Uninstall the tailgate latch assembly from its location. Website the latch/support cable assembly to the tailgate by first orienting the latch rod properly against the tailgate handle before installation. Tighten the latch assembly installation bolts until they reach 25 N.m (18 lb ft) torque. The support cable attachment should go back onto the bolt head of tailgate striker bolt while you put the latch rods into retaining clips before connecting those clips to the tailgate handle. Reinstall the tailgate cover then close down the tailgate.

OEM GMC Canyon Tailgate Latch

Rear Tailgate Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Tailgate Latches found

View related parts
GMC Canyon Lock, Passenger Side Part Number: 85585184
$13.18 MSRP: $19.60
You Save: $6.42 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch-Pick Up Box End Gate; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Lock, Driver Side Part Number: 85585183
$13.43 MSRP: $19.99
You Save: $6.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch-Pick Up Box End Gate; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Lock Actuator Part Number: 84785243
$45.96 MSRP: $68.41
You Save: $22.45 (33%)
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly-Pick Up Box End Gate Lock; Lock; Actuator, Rear Compartment Lid Release Or Ajar
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Lock Actuator Part Number: 84785242
$17.81 MSRP: $26.51
You Save: $8.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly-Pick Up Box End Gate Lock; Lock; Actuator, Rear Compartment Lid Release Or Ajar
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Lock, Passenger Side Part Number: 84741506
$120.16 MSRP: $196.04
You Save: $75.88 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch-Pick Up Box End Gate; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch
- Position: Passenger Side
- Replaces: 13595348, 13506425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Lock, Driver Side Part Number: 84741505
$131.16 MSRP: $196.04
You Save: $64.88 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch-Pick Up Box End Gate; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch
- Position: Driver Side
- Replaces: 13595347, 13506424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Lock, Passenger Side Part Number: 20788263
Product Specifications
- Other Name: Latch Assembly-Pick Up Box End Gate; Trunk Latch; Door Lock; Latch; Latch, End Gate Lock
- Position: Passenger Side
- Replaces: 15136257, 15247461, 15859416, 10367656, 15114296, 15870795, 10392464
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Lock, Driver Side Part Number: 20788262
$117.02 MSRP: $174.95
You Save: $57.93 (34%)
Product Specifications
- Other Name: Latch Assembly-Pick Up Box End Gate; Trunk Latch; Door Lock; Latch; Latch, End Gate Lock
- Position: Driver Side
- Replaces: 10392465, 15247462, 15136258, 15870794, 10367657, 15114297, 15859415
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

GMC Canyon Tailgate Latch

Want to cut long-term maintenance and repair costs? Choose OEM Tailgate Latch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Tailgate Latch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Canyon Tailgate Latch Parts and Q&A

Lock, Driver Side
20788262
Q: How to replace the tailgate latch and cable assembly on GMC Canyon?
A:
Start by supporting the tailgate for replacement of the Tailgate Latch and cable assembly by removing the tailgate cover first. Use pliers to disconnect retaining clips from the handle before removing latch rods from their clips. The support cable must move forward into position to release itself from the tailgate striker bolt. Start by unbolting the latch/support cable assembly from the tailgate before removing the full latch assembly. Install the latch/support cable assembly to the tailgate while making sure the latch rod will properly face the Tailgate Handle. Screw in the bolts which fasten the latch assembly while tightening them to 25 nm (18 lb ft). Place the support cable back on the bolt head of the tailgate striker bolt and position both latch rods inside their retaining clips before connecting the clips to the Tailgate Handle. Put back the tailgate cover before pulling the tailgate closed.
Lock, Passenger Side
20788263
Q: How to Service and Repair the Tailgate Latch on GMC Canyon?
A:
After opening and supporting the tailgate proceed by removing the tailgate cover. The tailgate latch rods require removal from their retaining clips after disconnecting the retaining clip connectors. The support cable must slide off the tailgate striker bolt head before you remove the bolts that connect the latch/support cable assembly into the tailgate structure. Uninstall the tailgate latch assembly from its location. Website the latch/support cable assembly to the tailgate by first orienting the latch rod properly against the tailgate handle before installation. Tighten the latch assembly installation bolts until they reach 25 N.m (18 lb ft) torque. The support cable attachment should go back onto the bolt head of tailgate striker bolt while you put the latch rods into retaining clips before connecting those clips to the tailgate handle. Reinstall the tailgate cover then close down the tailgate.