OEM GMC Envoy Automatic Transmission Shifter

GMC Envoy Automatic Transmission Shifter Parts Questions & Experts Answers

• Shifter Assembly
  15235213
  Q: How to replace the Automatic Transmission Shifter lever on GMC Envoy?

  A: Disabling the sir system is the first step before starting the process to replace the automatic transmission shift lever. The first step requires removal of upper and lower trim covers before you detach wire harness straps from the wire harness assembly. Detach the shift lever connector at the base of the column while using a pair of gloves to move the shift lever seal upwards along the shift lever. Use a screwdriver to remove the shift lever screw from the shift lever assembly. Then pull out the shift lever assembly and seal from the Steering Column by sliding the shift lever seal toward the narrow section of the shift lever base. The shift lever seal can be taken off from the shift lever when required. The technician should first install the shift lever seal on the shift lever assembly before mounting the assembly to the Steering Column. Fasten the shift lever screw into the shift lever assembly while tightening it to 1.5 nm (13 inch lbs.). Put the shift lever seal toward the bottom of the shift lever assembly and reinstall the upper and lower trim covers by matching the shift lever seal with the Steering Column trim covers before enabling the sir system.