OEM GMC Jimmy Body Control Module

GMC Jimmy Body Control Module Parts Questions & Experts Answers

• Express Module
  12533707
  Q: How to remove and replace the Body Control Module (BCM) while ensuring proper connection and programming on GMC Jimmy?

  A: Always start with the brown bcm connector after turning off the Ignition Switch and work in order to protect against setting dtcs. First take out the inner panel insulators from the left and center positions of the vehicle. Use your fingers to bend and hold the bcm snap retainers down. Pull the unit straight from the bracket at an angle to disconnect it. Place the bcm at an angle under the wide hook retainer with the label side down towards the bracket. Press the left side towards the base of the mounting bracket until it clicks into position and makes a firm connection with both snap retainers. Secure the electrical connections to the bcm while making sure to attach the brown connector last and fit back the instrument panel sound insulators. You need to use the techline terminal and diagnostic tool to program the bcm with its correct settings. After that, complete bcm programming and delete error messages found.