OEM GMC Jimmy Camshaft Position Sensor

GMC Jimmy Camshaft Position Sensor Parts Questions & Experts Answers

• Camshaft Position Sensor
  19417445
  Q: How to service the camshaft position sensor on GMC Jimmy?

  A: Service on the Camshaft Position Sensor requires you to first disconnect Spark Plug Wires along with the ignition coil wire from the Distributor and then remove the cmp harness connector from the Distributor. The first step of the service should begin with distributing cap screw removal followed by Distributor Cap removal then rotor screws removal and rotor removal. Protecting the reluctor wheel slot square and removing cmp screws allows removal of the cmp sensor from the Distributor. The installation procedure requires new replacement screws which should possess thread locking properties for cap and cmp sensor and rotor screw attachment. Insert the cmp sensor through the reluctor wheel slot while then installing new cmp mounting screws that require tightening to 2.2 n.m (20 lb in). First install the rotor onto the reluctor wheel before using new rotor screws to fasten it with a torque setting of 2.0 n.m (18 lb in). Use new Distributor Cap screws to fasten the Distributor Cap before tightening them to 2.4 n.m (21 lb in). To finish the process connect the cmp sensor harness connector then install back the Spark Plug Wires together with the ignition coil wire.