How to service the Engine Control Module to prevent Electrostatic Discharge damage on GMC Jimmy?

A vcm requires replacement or programming while the specialist avoids both the pins and components on the circuit board to stop electrostatic discharge (ESD) damage. The new vcm needs to receive both the passlock reprogramming and ckp system variation learn procedures before installation to prevent a dtc p1336. The system requires the Knock Sensor (KS) module transferred from the old unit. Start by canceling the battery power following the removal of bracket-mounted vcm bolts and raising the bracket to expose the A/C Accumulator before sliding it out. Pull out the retainer clips before disconnecting vcm connectors and remove the vcm from its bracket. When replacing the vcm start by removing access cover screws followed by the access cover itself while keeping the ks module in a protected position to prevent damage from occurring. The necessary step to remove the ks module requires a gentle pinch action on its retaining clip. Installation of the new vcm requires matching its service number to the original but the ks module installation should begin with socket alignment followed by clicking action when pushing the module into place. Place the access cover back along with its screws while tightening them to 5.0 n.m (44 lb in) so the snap retainer springs into position. Set the vcm inside the bracket and fasten the vcm connectors and retaining clips before placing the bracket beneath the fender edge while tightening its bolts to 10 n.m (89 lb in). When using a new vcm passenger must connect the negative Battery Cable followed by running the vcm programming procedure.

OEM GMC Jimmy Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Control Modules found

View related parts
GMC Jimmy Control Module Part Number: 9366810
$258.43 MSRP: $470.38
You Save: $211.95 (46%)
ADD TO CART
Product Specifications
- Other Name: Module, Vehicle Control; Engine Control Module; PCM; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 GMC Jimmy | Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Control Module Part Number: 88999187
$134.60 MSRP: $239.32
You Save: $104.72 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Remanufacture); Engine Control Module; Computer; PCM; ECM; Module, Emission Control System (ECM & EGR Components)
- Replaces: 16245357, 16168625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 GMC Jimmy | Base, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Control Module Part Number: 88999146
$136.60 MSRP: $273.60
You Save: $137.00 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Engine Control (Remanufacture); Engine Control Module; ECM; Emission Control System (Air Injector Reactor Valves, ECM Components, EGR Valves)
- Replaces: 01227747, 1227747
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 GMC Jimmy | Base, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Control Module Part Number: 88999123
$65.56 MSRP: $182.68
You Save: $117.12 (65%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Engine Control (Remanufacture); Engine Control Module; ECM; Module, Emission Control System(ECM Components); Module, Emission Control System
- Replaces: 1226865
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1986 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy PCM Part Number: 12200411
$239.24 MSRP: $434.84
You Save: $195.60 (45%)
ADD TO CART
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001 GMC Jimmy | Diamond Edition, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Control Module Part Number: 16229684
Product Specifications
- Other Name: Module, Vehicle Control; Engine Control Module; PCM; ECM
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 GMC Jimmy | SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy PCM Part Number: 16244210
Product Specifications
- Other Name: Module, Vehicle Control; Engine Control Module; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy ECM Part Number: 1226021
Product Specifications
- Other Name: Controller; Engine Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Computer Part Number: 88999163
$141.65 MSRP: $251.52
You Save: $109.87 (44%)
Product Specifications
- Other Name: Module, Engine Control (Remanufacture); Engine Control Module; ECM; Module, Emission Control System (Components, EGR Control)
- Replaces: 16144288
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 GMC Jimmy | Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy PCM Part Number: 16263494
$341.63 MSRP: $610.42
You Save: $268.79 (45%)
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 GMC Jimmy | Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy PCM Part Number: 16197427
$322.76 MSRP: $575.02
You Save: $252.26 (44%)
Product Specifications
- Other Name: Module, PCM (Remanufactured); Engine Control Module; ECM; Module, Emission Control System(EGR Control); Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

GMC Jimmy Engine Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Engine Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Jimmy parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Jimmy Engine Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The most acclaimed electronics fitting the GMC Jimmy is the Engine Control Module, or ECM, which stands as the main operational controlling unit that regulates the engine performance throughout different models of the GMC Jimmy. This Engine Control Module works in regulating engine operations by way of controlling the fuel-air mixture and ignition timing requirements that make up the peak operating efficiency of the vehicle. Also, ECM may also act as a Powertrain Control Module (PCM), which controls the transmission gear operations and helps in the improvement of the vehicle's performance. Being capable of storing program instructions specific to GMC Jimmy models, the Engine Control Module can be fine-tuned to meet the drivers' expectations and more so increase the vehicle performances. The characteristics of the ECM include real-time engine analysis and the management of the air-fuel mixture, which notably increases the vehicle's efficiency and safety, therefore making it an important part of the car industry. This GMC Jimmy Engine Control Module is unique because it is compatible with different Jimmy models, and this guarantees that drivers will keep maintaining their vehicles. Considering that it has provisions for performance modifications, that make it quite an innovative design, it can go a long way in improving driving experience. To prove it, many GMC Jimmy models that came with this Engine Control Module are still performing well as GMC's creates hardy vehicles that can last long on the road.

GMC Jimmy Engine Control Module Parts Questions & Experts Answers

PCM
16263494
Q: How to service the Engine Control Module to prevent Electrostatic Discharge damage on GMC Jimmy?
A:
A vcm requires replacement or programming while the specialist avoids both the pins and components on the circuit board to stop electrostatic discharge (ESD) damage. The new vcm needs to receive both the passlock reprogramming and ckp system variation learn procedures before installation to prevent a dtc p1336. The system requires the Knock Sensor (KS) module transferred from the old unit. Start by canceling the battery power following the removal of bracket-mounted vcm bolts and raising the bracket to expose the A/C Accumulator before sliding it out. Pull out the retainer clips before disconnecting vcm connectors and remove the vcm from its bracket. When replacing the vcm start by removing access cover screws followed by the access cover itself while keeping the ks module in a protected position to prevent damage from occurring. The necessary step to remove the ks module requires a gentle pinch action on its retaining clip. Installation of the new vcm requires matching its service number to the original but the ks module installation should begin with socket alignment followed by clicking action when pushing the module into place. Place the access cover back along with its screws while tightening them to 5.0 n.m (44 lb in) so the snap retainer springs into position. Set the vcm inside the bracket and fasten the vcm connectors and retaining clips before placing the bracket beneath the fender edge while tightening its bolts to 10 n.m (89 lb in). When using a new vcm passenger must connect the negative Battery Cable followed by running the vcm programming procedure.