What tools are required to service and repair the slip yoke on GMC Jimmy?

The maintenance of a Slip Yoke requires ball puller (J23996-2) along with u joint bearing separator (J9522-3) and u joint bearing spacer remover (J9522-5) that operates with j9522-3. First remove the specified bearings in sequence while marking all yokes to keep driveshaft balanced for reassembling purposes. The production universal joints become unusable due to disassembly so all separated components must be thrown away. Place the Universal Joint inside the 30 mm (1 1/8 inch) socket at the lower ear of the yoke while horizontally supporting the propeller shaft on a press. Use j9522-5 to extract the open horizontal bearing cups by placing it onto the bearing cups then press the lower bearing cup out. Once the bearing cup fails to dislodge completely, lift the cross to create space for j9522-5 tool which can push out the seal and bearing cup in tandem. Both bearing cup installation and removal require the propeller shaft rotation for pressing out the opposite section. Inspect retaining ring grooves and bearing cup bores for impurities while performing this operation. After removing sheared plastic retainers from the yoke grooves use cleaning methods to prepare the location for the new bearing cups. Begin installation by adding the flange yoke to the inner cross on the ball tube yoke before installing bearing cup assemblies and the ball support yoke cross within the flange yoke by using the marked reference points. Use a hammer to strike the flange yoke if any trunnions appear too tight since this will help the retaining rings find their proper position.

OEM GMC Jimmy Slip Yoke

Transmission Slip Yoke

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Slip Yokes found

View related parts
GMC Jimmy Companion Flange
Part Number: 12470387
$137.48 MSRP: $225.03
You Save: $87.55 (39%)
ADD TO CART
Product Specifications
- Other Name: Yoke Kit, Differential Drive Pinion Gear; Yoke Kit, Propeller Shaft Pinion; Flange, Propeller Shaft Pinion; Yoke, Propeller Shaft Pinion
- Replaced by: 19540029
- Replaces: 01256654, 1256654, 26016664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2001, 1985-1991 GMC Jimmy | Base, Diamond Edition, Envoy, High Sierra, Sierra Classic, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Slip Yoke
Part Number: 460835
Product Specifications
- Other Name: Comp. Flange Assembly; Yoke Assembly, Universal Joint and Power Divider (Transmission; Transfer Case)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Companion Flange
Part Number: 26044459
Product Specifications
- Other Name: Flange, Propeller Shaft Pinion; Yoke, Propeller Shaft Pinion; Flange, Rear Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Slip Yoke
Part Number: 15153615
Product Specifications
- Other Name: Yoke, Universal Joint And Power Divider; Driveshaft Yokes
- Position: Front
- Replaces: 07816706, 7816706
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Slip Yoke
Part Number: 14037992
Product Specifications
- Other Name: Yoke, Universal Joint And Power Divider; Yoke Assembly, Universal Joint And Power Divider
- Position: Front
- Replaced by: 12547459
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Companion Flange
Part Number: 12471515
Product Specifications
- Other Name: Yoke Kit, Differential Drive Pinion Gear; Yoke Kit, Propeller Shaft Pinion; Yoke, Propeller Shaft Pinion
- Replaces: 26031595, 26054339, 26014374
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Companion Flange
Part Number: 12471182
Product Specifications
- Other Name: Yoke Kit, Differential Drive Pinion Gear; Yoke; Yoke Kit, Propeller Shaft Pinion
- Replaces: 26027711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Companion Flange
Part Number: 14039582
Product Specifications
- Other Name: Flange, Propeller Shaft Pinion; Yoke; Yoke, Propeller Shaft Pinion
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Companion Flange
Part Number: 12479332
Product Specifications
- Other Name: Yoke Kit, Differential Drive Pinion Gear; Yoke; Flange; Yoke Kit, Propeller Shaft Pinion; Flange, Propeller Shaft Pinion; Yoke, Propeller Shaft Pinion
- Replaces: 12471517, 12479030
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

GMC Jimmy Slip Yoke

Our website offers an extensive catalog of genuine GMC Jimmy Slip Yoke at unbeatable prices. Every OEM GMC Jimmy Slip Yoke comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Jimmy Slip Yoke Parts Questions & Experts Answers

Companion Flange
12470387
Q: What tools are required to service and repair the slip yoke on GMC Jimmy?
A: The maintenance of a Slip Yoke requires ball puller (J23996-2) along with u joint bearing separator (J9522-3) and u joint bearing spacer remover (J9522-5) that operates with j9522-3. First remove the specified bearings in sequence while marking all yokes to keep driveshaft balanced for reassembling purposes. The production Universal Joints become unusable due to disassembly so all separated components must be thrown away. Place the Universal Joint inside the 30 mm (1 1/8 inch) socket at the lower ear of the yoke while horizontally supporting the propeller shaft on a press. Use j9522-5 to extract the open horizontal bearing cups by placing it onto the bearing cups then press the lower bearing cup out. Once the bearing cup fails to dislodge completely, lift the cross to create space for j9522-5 tool which can push out the seal and bearing cup in tandem. Both bearing cup installation and removal require the propeller shaft rotation for pressing out the opposite section. Inspect retaining ring grooves and bearing cup bores for impurities while performing this operation. After removing sheared plastic retainers from the yoke grooves use cleaning methods to prepare the location for the new bearing cups. Begin installation by adding the flange yoke to the inner cross on the ball tube yoke before installing bearing cup assemblies and the ball support yoke cross within the flange yoke by using the marked reference points. Use a hammer to strike the flange yoke if any trunnions appear too tight since this will help the retaining rings find their proper position.

Related GMC Jimmy Parts

Browse GMC Jimmy Slip Yoke by Years

2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984