How to replace the rear leaf spring bushing on GMC Jimmy?

The vehicle needs to be lifted and properly supported before replacing shackle bushings. When working on 2-door utilities first remove the Fuel Tank together with the evap canister. In case of required spare tire removal on pickups and 4-door utility models the mechanic should disconnect the rear exhaust hangers to achieve better exhaust system accessibility. First support the rear axle before taking out the spring shackle to frame mounting bolt and its associated nut. Keep the Leaf Spring with its attached lower spring shackle mounting bolt. Drop the axle to a suitable height which enables access to remove the spring shackle bushings. While removing the Fuel Tank use a blunt punch to straighten the bushing flange then replace both spring shackle bushings. Use control arm bushing service kit (J 21474-01) to remove spring shackle bushing before repeating this same process on the other bushing. The control arm bushing service kit (J 21474-01) enables installation of new spring shackle bushings by placing the bushing flange directly against the frame rail before using the stake tool on the inner flange. First position the axle in place and fasten the spring shackle to the frame through bolt and nut without tightening. After installing the second bushing insert the axle support to achieve a 164 - 176 mm (6.46 - 6.94 inches) gap between axle tube and bumper bracket metal surface. Tighten the rear spring shackle nuts to 122 nm (89 ft. Lbs.)you must first remove the rear axle support then possibly lift the exhaust system to install rear exhaust hangers. After lowering the car down install the spare tire followed by reinstalling both the evap canister for two-door utilities and the Fuel Tank.

OEM GMC Leaf Spring Bushing

Spring Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Leaf Spring Bushings found

View related parts
GMC Leaf Spring Bushing
Part Number: 15963452
$12.14 MSRP: $20.66
You Save: $8.52 (42%)
ADD TO CART
Product Specifications
- Other Name: Bushing; Bushing, Rear Spring
- Position: Rear
Fits the following GMC Models:
- Sonoma | 1996-2004 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Leaf Spring Bushing, Rear
Part Number: 14027938
$14.35 MSRP: $23.63
You Save: $9.28 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Spring Shackle; Spring Bushing; Leaf Spring Rear Bushing; Bushing; Bushings
- Position: Rear
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
- Jimmy | 1995-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Spring Bushing
Part Number: 94772418
$26.43 MSRP: $43.50
You Save: $17.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Spring; Leaf Spring Bushing; Shackle Bushing; Leaf Spring Rear Bushing; Bushing; Bushing, Rear Spring Shackle
- Position: Rear
Fits the following GMC Models:
- Canyon | 2015-2023 | All Terrain, AT4, AT4X, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Leaf Spring Bushing, Rear
Part Number: 468481
Product Specifications
- Other Name: Bushing, Rear Spring; Spring Bushing; Bushing; Bushing, Front Spring Front
- Position: Rear
Fits the following GMC Models:
- Jimmy | 1992-1994 | Base, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- S15 Jimmy | 1984-1991 | Base, Gypsy, High Sierra, Sierra Classic, SLE, SLS, SLT, Timberline | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
- Sonoma | 1991-2004 | Base, GT, SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
- Syclone | 1991 | Base | 6 Cyl 4.3 L GAS
- Typhoon | 1992-1993 | Base | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Leaf Spring Front Bushing
Part Number: 15739091
Product Specifications
- Other Name: Bushing; Leaf Spring Bushing; Bushing, Rear Spring
- Position: Rear
Fits the following GMC Models:
- Sierra 1500 | 2005-2006 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
- Sierra 1500 Classic | 2007 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Leaf Spring Bushing
Part Number: 15529515
Product Specifications
- Other Name: Bushing; Bushing, Rear Spring
- Position: Rear
Fits the following GMC Models:
- C1500 | 1988-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C2500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1988-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K2500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Yukon | 1992-2000 | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Leaf Spring Bushing, Rear
Part Number: 15050270
Product Specifications
- Other Name: Bushing, Rear Spring; Leaf Spring Rear Bushing
- Position: Rear
Fits the following GMC Models:
- Sierra 1500 | 1999-2006 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 Classic | 2007 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
- Sierra 1500 HD | 2005, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View More

GMC Leaf Spring Bushing Parts Questions & Experts Answers

Leaf Spring Bushing, Rear
14027938
Q: How to replace the rear leaf spring bushing on GMC Jimmy?
A: The vehicle needs to be lifted and properly supported before replacing shackle bushings. When working on 2-door utilities first remove the Fuel Tank together with the evap canister. In case of required spare tire removal on pickups and 4-door utility models the mechanic should disconnect the rear exhaust hangers to achieve better exhaust system accessibility. First support the rear axle before taking out the spring shackle to frame mounting bolt and its associated nut. Keep the Leaf Spring with its attached lower spring shackle mounting bolt. Drop the axle to a suitable height which enables access to remove the spring shackle bushings. While removing the Fuel Tank use a blunt punch to straighten the bushing flange then replace both spring shackle bushings. Use control arm bushing service kit (J 21474-01) to remove spring shackle bushing before repeating this same process on the other bushing. The control arm bushing service kit (J 21474-01) enables installation of new spring shackle bushings by placing the bushing flange directly against the frame rail before using the stake tool on the inner flange. First position the axle in place and fasten the spring shackle to the frame through bolt and nut without tightening. After installing the second bushing insert the axle support to achieve a 164 - 176 mm (6.46 - 6.94 inches) gap between axle tube and bumper bracket metal surface. Tighten the rear spring shackle nuts to 122 nm (89 ft. Lbs.)you must first remove the rear axle support then possibly lift the exhaust system to install rear exhaust hangers. After lowering the car down install the spare tire followed by reinstalling both the evap canister for two-door utilities and the Fuel Tank.