Other Name: Sensor Assembly-Rear Suspension 2 Or 4 Corner Air Leveling; Headlight Level Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
Position: Rear Passenger Side
Replaced by: 19540718
Fits the following GMC Models:
Yukon | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Yukon XL | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Q: How to replace the rear right Ride Height Sensor for the electronic suspension on GMC Yukon?
A: Starting the right side electronic suspension rear position sensor replacement process requires the user to lift the vehicle then remove the wheel. Detach the sensor harness connector from the vehicle harness connector before removing the sensor link from the ball stud. The position sensor requires removing its bolts followed by extracting the component from the vehicle. To install the new position sensor you should place it on the vehicle position before securing it with bolts and tightening them to 12 Nm (106 inch lbs.) based on Service Precautions Fastener Notice. Place the sensor link onto the ball stud then join the sensor harness connector into the vehicle harness connector. Close the procedure by putting back the wheel and lowering the vehicle.