OEM GMC Savana 1500 Washer Reservoir

GMC Savana 1500 Washer Reservoir Parts Questions & Experts Answers

• Washer Reservoir
  88958134
  Q: How to replace the windshield washer reservoir on GMC Savana 1500?

  A: You must lift the hood and keep it supported when replacing the windshield Washer Reservoir. Start by removing the upper fender support bar and bolt from the washer solvent container. You can reach the Washer Pump when you lift the container. Disconnect the electrical connector from the Washer Pump and remove the washer hose at that location. Pump out washer solvent from the reservoir into a suitable container before taking off the Washer Pump and cap unit from the container. Put the Washer Pump onto the new washer solvent container then fasten the cap. Plug the electrical connector onto the Washer Pump while you detach the Washer Pump cap and join the washer hose. Place the washer solvent container into the chassis holes and fasten it to the chassis with the bolt while tightening it to 10 n.m. After completing the work put back the upper fender support bar then fill and close the washer solvent container.