OEM GMC Savana 2500 Cruise Control Module

GMC Savana 2500 Cruise Control Module Parts and Q&A

• Control Module
  25315088
  Q: How to replace the cruise control module on GMC Savana 2500?

  A:

  Begin Cruise Control Module replacement by supporting the hood before taking out the air cleaner assembly from the vehicle. Separate the Cruise Control Module's electrical connection and cruise control cable. Disassemble the cruise control bracket by unscrewing its two supporting nuts and extract the Cruise Control Module from both components and the vehicle. Reinstall the Cruise Control Module into the vehicle across the cruise control bracket then follow the fastener notice in service precautions during setup. Two nuts need to be tightened to 5 n.m (44 lb in) for securing the module. Rejoin the cruise control cable together with the electrical connector to the Cruise Control Module before installing the air cleaner assembly and closing the hood.
• Control Module
  15752335
  Q: How to Service and Repair the Cruise Control Module on GMC Savana 2500?

  A:

  To replace the Cruise Control Module, before hand, lift up and support the hood then remove air cleaner assembly from the vehicle. For 4.3l, use the air cleaner assembly replacement procedure and for the 4.8l, 5.3, and 6.0l, a similar procedure is to be followed. Then, remove the electrical connector of the cruise control and the cruise control cable from the Cruise Control Module. Take off the two nuts that hold the Cruise Control Module to the cruise control bracket and pull the Cruise Control Module out of the cruise control bracket and the vehicle. Installation guide for Cruise Control Module: return the Cruise Control Module back to the vehicle and crane it on to the cruise control bracket. Mount the two nuts and tighten them onto the Cruise Control Module and tighten them towards the cruise control bracket with a torque of 5n.m (44 lb in) get the cruise control cable and the electrical connector back to the Cruise Control Module and reinstall air cleaner assembly by the correct replacement method based on engine type. Lastly, close the hood, and continue with-dropdown programming-install and relearning if needed.