GM 15752335
Control Module

First of all, lift and support the hood off and remove the air cleaner assembly from the vehicle to replace the Cruise Control Module. For the 4.3l and for 4.8l, 5.3l and 6.0l engines disconnect the electrical connector from Cruise Control Module and cruise control cable from Cruise Control Module. Estimate the amounts to be printed based on the product price and the sizes of the coupons.ysical coupons will require you to assign staff to do each task. this benefit saves both the organisations and departments a ton of irritation concerning air conditions, air organization, air freshening filters in autos, keeping tires intact and also the many air conditioners that are functional for use. In terms of installation, reinstall the Cruise Control Module in the vehicle back on the cruise control bracket and tightened with the two nuts to 5 n.m (44 lb in), as pointed out by the fastener notice in service precautions. Next, attach the cruise control cable and the electrical connector with the Cruise Control Module, reinstall the air cleaner assembly, and finally closing the hood.

First, you should lift and support the hood and remove the air cleaner assembly from the car, to be able to replace the Cruise Control Module. Remove the cable for the Cruise Control Module and the electrical connector from the cruise module. After that, detach the two nuts holding the Cruise Control Module to the bracket of the cruise control and extract the module out of the bracket and from the vehicle structure. For installation, locate the vehicle and the vehicle cruise control bracket with the Cruise Control Module and attach it to the cruise control bracket but use the fastener notice in service precautions. Secure the module, tightening the two nuts to 5 n.m (44 lb in). Reattach cruise control cable end (b) and electrical connector back to Cruise Control Module, reinstall air cleaner assembly, and close hood.

Initiating replacement of the Cruise Control Module requires lifting and supporting the hood and subsequently removing the air cleaner assembly from the vehicle. Remove the Cruise Control Module's electrical connector and cruise control cable to complete the operation. After removing the two nuts fixing the Cruise Control Module to its bracket users can extract the Cruise Control Module from both the bracket and vehicle. Fasten the Cruise Control Module onto the cruise control bracket in the vehicle by using two nuts and keeping their torque at 5 n.m (44 lb in). The installation process requires you to first tighten the air cleaner assembly before reconnecting the cruise control cable and electrical connector to the Cruise Control Module. Finally, close the hood.

First, you should lift and support the hood and remove the air cleaner assembly from the car, to be able to replace the Cruise Control Module. Remove the cable for the Cruise Control Module and the electrical connector from the cruise module. After that, detach the two nuts holding the Cruise Control Module to the bracket of the cruise control and extract the module out of the bracket and from the vehicle structure. For installation, locate the vehicle and the vehicle cruise control bracket with the Cruise Control Module and attach it to the cruise control bracket but use the fastener notice in service precautions. Secure the module, tightening the two nuts to 5 n.m (44 lb in). Reattach cruise control cable end (b) and electrical connector back to Cruise Control Module, reinstall air cleaner assembly, and close hood.

First, lift and support the hood, and pull out the air cleaner assembly from the car. For the 4.3l engine, and for the 4.8l, 5.3l, and 6.0l engines, remove the electrical connection from the Cruise Control Module and cruise control cable from the Cruise Control Module. Take the two nuts that hold the Cruise Control Module to the cruise control bracket and remove it from the cruise control bracket and the vehicle. For installation, have the Cruise Control Module go back into the vehicle and mount it over the cruise control bracket , and tighten the two nuts to 5 n.m (44 lb in). Next, connect the cruise control cable and the electrical connector to the Cruise Control Module, reinsert the air cleaner assembly, and, eventually, close the hood.

To replace the Cruise Control Module, before hand, lift up and support the hood then remove air cleaner assembly from the vehicle. For 4.3l, use the air cleaner assembly replacement procedure and for the 4.8l, 5.3, and 6.0l, a similar procedure is to be followed. Then, remove the electrical connector of the cruise control and the cruise control cable from the Cruise Control Module. Take off the two nuts that hold the Cruise Control Module to the cruise control bracket and pull the Cruise Control Module out of the cruise control bracket and the vehicle. Installation guide for Cruise Control Module: return the Cruise Control Module back to the vehicle and crane it on to the cruise control bracket. Mount the two nuts and tighten them onto the Cruise Control Module and tighten them towards the cruise control bracket with a torque of 5n.m (44 lb in) get the cruise control cable and the electrical connector back to the Cruise Control Module and reinstall air cleaner assembly by the correct replacement method based on engine type. Lastly, close the hood, and continue with-dropdown programming-install and relearning if needed.