Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2002 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
GMC Savana 2500 Wheel Hub
Our website offers an extensive catalog of genuine GMC Savana 2500 Wheel Hub at unbeatable prices. Every OEM GMC Savana 2500 Wheel Hub comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 2500 Wheel Hub Parts Questions & Experts Answers
Q: How to replace the Wheel Hub, Bearing, and Seal on a rear-wheel drive on GMC Savana 2500?
A: Once the vehicle stands secure and lifted start by taking off the tire followed by the wheel and rotor to access the Wheel Hub bearing and seal on a rear-wheel drive vehicle. You should take out the Wheel Speed Sensor mounting bolt to extract the Wheel Speed Sensor from the Wheel Hub and bearing. Use the right tools to extract the Wheel Hub and bearing alongside the splash shield from the Steering Knuckle. Apply wheel bearing grease or equivalent into the Steering Knuckle bore then wipe away all rust or dirt from within the Steering Knuckle bore and hub bearing. Put the Wheel Hub and bearing into its place on the Steering Knuckle while observing fastener instructions. Secure the Wheel Hub and bearing mounting bolts at 180 n.m (133 lb ft). The speed sensor mounts back into the Wheel Hub and bearing as you tighten its bolt to 18 n.m (13 lb ft). Once complete place back the rotor then fasten wheel and tire assembly while letting the vehicle rest on the ground.