Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15233113
Front Hub

1999-2010 GM

Customer Questions & Expert Answers (20)
GM 15233113 Front Hub
GM 15233113 Front Hub
GM 15233113 Front Hub
GM 15233113 Front Hub
GM 15233113 Front Hub
  • Part Description
    Hub, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.
  • Position
    Front
  • Replaces
    15112382, 15134584, 15740291
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 1999 Chevy Silverado 1500 Front Hub Diagram for 15233113
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15233113

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2004-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2010 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2008 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2008 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15233113 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15233113 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you extract the oil seal from the wheel hub for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Use a suitable seal removal tool.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you extract the oil seal from the wheel hub for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Use a suitable seal removal tool.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Hub
    Q:
    What are the final steps to complete the installation for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the dust cap, reattach the outer tie rod to the steering knuckle, reinstall the brake rotor, put the tire and wheel back on, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the process for replacing both left side seal and bearing for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Remove the differential carrier assembly, secure it in a vise, and repeat the removal process.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the torque specification for the wheel drive shaft retaining nut for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Tighten it to 250 N.m (184 lb ft).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be done after reinstalling the wheel speed sensor for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Install the wheel driveshaft retaining nut and washer, tightening the nut to 240 Nm (177 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What are the final steps after installing the axle shaft seal and bearing for the 2004 Chevrolet Express 3500? Posted by Customer
    A:
    Install the axle shaft, fill the rear axle, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the procedure for the 9.75 inch axle seal installation for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Use the Rear Axle Bearing/Seal Installer (J 45853) and the Universal Driver Handle (J 8092) to install the axle shaft seal, ensuring it is fully seated in the axle tube.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How should the steering knuckle bore and hub and bearing assembly be prepared for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Clean all corrosion or contaminants and lubricate the steering knuckle bore with wheel bearing grease or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be installed last before lowering for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the dust cap, followed by the brake rotor, tire, and wheel, and then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the first step in the replacement process for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Begin by raising the vehicle and draining the differential carrier assembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What tools are needed to replace the rear oil seal or bearing for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    The necessary tools are J 8092 Driver Handle, J 21128 Axle Shaft Seal Installer (8.6 inch Axle), J 23690 Axle Shaft Bearing Installer (8.6 inch Axle), J 2619-01 Slide Hammer, J 29709 Axle Shaft Bearing Installer (9.5 inch Axle), J 29712 Axle Shaft Bearing Remover (9.5 inch Axle), J 29713 Axle Shaft Seal Installer (9.5 inch Axle), and J 44685 Axle Shaft Bearing Remover (8.6 inch Axle).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be done after securing the wheel hub and bearing for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Install the wheel drive shaft retaining nut, ensuring it is tightened to 250 Nm (184 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the first step to replace the rear axle shaft seal or bearing for the 2010 GMC Savana 1500? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What tools are needed to replace the rear axle hub, bearing, cup, or seal for the 2003 GMC Savana 3500? Posted by Customer
    A:
    J8092 Universal Driver Handle (J8092), J2222-C Wheel Bearing Nut Wrench (J2222-C), J24426 Wheel Bearing Race Installer-Outer (J24426), J24427 Wheel Bearing Race Installer-Inner (J24427), J44419 Hub Outer Bearing Race Installer (J44419), and J44420 Differential Side Bearing Installer (J44420).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the next step after removing the brake rotor for the 2005 GMC Yukon? Posted by Customer
    A:
    Take off the axle nut dust cover, then remove the cotter pin and retainer from the wheel drive shaft nut, followed by the wheel drive shaft retaining nut.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the procedure for the 9.75 inch axle seal installation for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Use the Rear Axle Bearing/Seal Installer (J 45853) and the Universal Driver Handle (J 8092) to install the axle shaft seal, ensuring it is fully seated in the axle tube.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be removed after raising for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the tire and wheel, followed by the rotor.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What are the final steps after installing the new components for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reinstall the axle shaft, rear axle housing cover, tire and wheel assembly, fill the rear axle, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Hub 15233113 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15233113 Front Hub is available in the market under the name GM Wheel Bearing, Wheel Hub. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15233113 Front Hub fits certain Chevrolet Tahoe, Silverado 1500, Express 1500 models, as well as GMC Sierra 1500, Yukon, Savana 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15233113 maintains top performance when functioning as the Hub, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing. unit at its Front. The component 15233113 is constructed from durable material and its dimensions span 13.8 x 12.4 x 8.2 inches while weighing 14.60 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hub & Bearing; Hub. The part 15233113 has available replacement options 15112382, 15134584, 15740291. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.