Other Name: Mount, Transmission Mounting; Transfer Case Mount
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2009 GMC Savana 3500 | Base | 8 Cyl 6.6 L DIESEL
| Page 1 of 2 |Next >
1-20 of 28 Results
GMC Savana 3500 Motor And Transmission Mount
Want to cut long-term maintenance and repair costs? Choose OEM Motor And Transmission Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 3500 Motor And Transmission Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
GMC Savana 3500 Motor And Transmission Mount Parts and Q&A
Q: How to service and repair the Motor and Transmission Mount on GMC Savana 3500?
A:
First, to service and repair the transmission mount, one supports the Transmission Assembly with a proper transmission stand. Get the bolts and washers out of the rear Engine Mount and lift the transmittance assembly slightly for removal of the rear Engine Mount that should be removed. For installation, install the rear Engine Mount to the transmission while following the fastener notice in service precautions. Install the rear Engine Mount bolts and tighten them to 47 nm (35 ft. Lbs.). Lower the rear of the engine and mount the rear Engine Mount to the nut & washer, then tighten these bolts to a torque specification of 47nm (35 ft. Lbs.). Finally, take off the transmission stand and lower the vehicle.
Q: How to replace the Motor and Transmission Mount on a 4L60-E/4L65-E on GMC Savana 3500?
A:
You must start by supporting both your vehicle and transmission using a transmission jack after raising it to replace the transmission mount for a 4L60-E/4L65-E. First disconnect the transmission mount mounting bolts that secure RWD vehicles then shave off the mounting bolts for 4WD vehicles before extracting the transmission mount out of the vehicle. Position the new transmission mount onto the vehicle before tightening all 4WD bolts to 50 Nm (37 ft. lbs.), then apply a 50 Nm (37 ft. lbs.) torque to the RWD mounting bolts. Mount the transmission support and disconnect the transmission jack before lowering the entire vehicle back to the ground.