How to replace the wiper arm on GMC Savana 3500?

Begin by placing the wipers in park position before dismantling the washer hose from the air inlet grille panel. Take off the protective casing from the Wiper Arm nut and then unscrew the nut. If the Wiper Arm stays fixed on the Drive Shaft try both a Wiper Arm puller (J 39822) or a battery terminal puller to remove it. After breaking free use the tool to pull off the Wiper Arm ahead of removing the Wiper Blade. Install the Wiper Blade onto the Wiper Arm and secure it to the Drive Shaft by positioning the Wiper Arm until its center falls between the black locator dots on the lower center windshield. The wiper arms function correctly only when installed based on their stamped markings. Position the Wiper Arm close to the air inlet grille before tightening its nut to 26 n.m (19 lb ft). Reinstall the air inlet grille cover after you tighten the nut. Then reconnect the washer hose elbow to the air inlet grille panel. Test the wiper movement to confirm it works correctly.

OEM GMC Savana 3500 Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
GMC Savana 3500 Wiper Arm, Driver Side
Part Number: 84447096
$59.66 MSRP: $106.56
You Save: $46.90 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Arm, Windshield Wiper Transmission
- Position: Driver Side
- Replaces: 12487591, 15072707, 15947914, 12367263, 22138637, 25961211, 88958103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2024 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Wiper Arm, Passenger Side
Part Number: 84447095
$63.27 MSRP: $112.99
You Save: $49.72 (44%)
ADD TO CART
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Arm, Windshield Wiper Transmission
- Position: Passenger Side
- Replaces: 12487590, 15072708, 22138636, 15947915, 12367262, 88958104, 25961210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2024 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Wiper Blade Refill
Part Number: 22143943
Product Specifications
- Other Name: Wiper, Windshield Wiper Blade; Windshield Wiper Blade Refills; Wiper Blade Insert; Wiper Insert; Blade Insert; Blade Assembly Insert; Insert; Wiper, Windshield Wiper; Wiper Blade
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 GMC Savana 3500 | Base, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

GMC Savana 3500 Wiper Arm

Our website offers an extensive catalog of genuine GMC Savana 3500 Wiper Arm at unbeatable prices. Every OEM GMC Savana 3500 Wiper Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Savana 3500 Wiper Arm Parts Questions & Experts Answers

Wiper Arm, Driver Side
84447096
Q: How to replace the wiper arm on GMC Savana 3500?
A: Begin by placing the wipers in park position before dismantling the washer hose from the air inlet grille panel. Take off the protective casing from the Wiper Arm nut and then unscrew the nut. If the Wiper Arm stays fixed on the Drive Shaft try both a Wiper Arm puller (J 39822) or a battery terminal puller to remove it. After breaking free use the tool to pull off the Wiper Arm ahead of removing the Wiper Blade. Install the Wiper Blade onto the Wiper Arm and secure it to the Drive Shaft by positioning the Wiper Arm until its center falls between the black locator dots on the lower center windshield. The wiper arms function correctly only when installed based on their stamped markings. Position the Wiper Arm close to the air inlet grille before tightening its nut to 26 n.m (19 lb ft). Reinstall the air inlet grille cover after you tighten the nut. Then reconnect the washer hose elbow to the air inlet grille panel. Test the wiper movement to confirm it works correctly.