Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 22143943
Wiper Blade Refill

1992-2009 GM

Customer Questions & Expert Answers (36)
GM 22143943 Wiper Blade Refill
GM 22143943 Wiper Blade Refill
GM 22143943 Wiper Blade Refill
  • Part Description
    Wiper, Windshield Wiper Blade; Windshield Wiper Blade Refills
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 22143943 Wiper Blade Refill is Ref No. 2 in the diagram below

    2003 Chevy Impala Wiper Blade Refill Diagram for 22143943
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 22143943

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1994-1996 Buick Commercial ChassisBase8 Cyl 5.7 L GAS
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1994-1999 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1996-2000 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2000-2004 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
    1995-1999 Buick RivieraBase6 Cyl 3.8 L GAS
    1994-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.7 L GAS
    1994-1999 Cadillac DeVilleBase, Concours, d'Elegance8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    1994-2002 Cadillac EldoradoBase, ESC, ETC, Touring8 Cyl 4.6 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22143943 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22143943 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Wiper Blade Element on Cadillac Eldorado? Posted by Customer
    A:
    The process begins by taking the Wiper Blade from the Wiper Arm then pulling the Wiper Blade element through the claws and removing the Wiper Blade from its bottom points. Configuration of wiper blades should be performed carefully by placing the claws inside rubber claw channels and keeping them separate from the element's metal spline. Begin by loosely inserting the open side of the Wiper Blade element into its corresponding lower claws on the Wiper Blade . Then follow by guiding the Wiper Blade element through the Wiper Blade claw sets before final engagement of the bottom claw into Wiper Blade element notches and Wiper Blade arm installation completes the operation.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the wiper arm for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Remove the wiper blade from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after tightening the wiper arm nut for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Install the wiper arm nut cover, reconnect the washer hose to the wiper arm, and operate the windshield wipers to inspect for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you verify proper functionality after the installation for the 2003 Buick Century? Posted by Customer
    A:
    Operate the windshield wipers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the windshield wiper blade for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Turn the ignition ON and set the wiper switch to the DELAY position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be done when the wiper drive system is at the bottom of its wipe cycle for the 2000 Buick Century? Posted by Customer
    A:
    Turn off the ignition when it is not moving.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the final step in installing the wiper blade for the 2000 Buick Century? Posted by Customer
    A:
    Engage the bottom claw of the wiper blade into the notches in the wiper blade element and finally, install the wiper blade onto the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you remove the wiper arm from the wiper transmission for the 2005 Buick Century? Posted by Customer
    A:
    Use the Wiper Arm Puller (J 39822).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the final step after reassembling the wiper arm for the 2002 Buick Century? Posted by Customer
    A:
    Reconnect the washer hose to the wiper arm and operate the windshield wipers to inspect for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the torque specification for securing the nut for the 2000 Buick Park Avenue? Posted by Customer
    A:
    25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you do once the windshield wipers are in the mid wipe position for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Turn the ignition OFF.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you install the new wiper arm for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Position the wiper arm onto the wiper transmission, aligning the wiper blades to the small voids in the windshield blackout.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What components need to be removed to take off the wiper arm for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Remove the wiper arm nut cover and the wiper arm nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after turning off the ignition for the 2001 Buick Regal? Posted by Customer
    A:
    Disconnect the washer hose from the washer nozzle, remove the cover from the nut, and take off the nut from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you install the new wiper arm for the 2000 Buick Regal? Posted by Customer
    A:
    First, attach the wiper blade to the wiper arm, then reinstall the wiper arm onto the wiper transmission drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What needs to be disconnected before removing the wiper arm for the 2004 Buick Regal? Posted by Customer
    A:
    Disconnect the washer hose from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you do after positioning the wiper blade pivot for the 2000 Buick Regal? Posted by Customer
    A:
    Pull the wiper blade pivot into the wiper arm hook until it locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the final step in the installation process for the 2000 Cadillac Eldorado? Posted by Customer
    A:
    Engage the bottom claw of the wiper blade into the notches in the wiper blade element before finally installing the wiper blade onto the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be done to the transmission pivot shaft before installation for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    Clean the knurls of the transmission pivot shaft with a soft wire brush and remove the wiper blade from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the next step after removing the wiper arm for the 2000 Cadillac Eldorado? Posted by Customer
    A:
    Remove the wiper blade from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What tools are necessary to replace the wiper arm for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Wiper Arm Puller (J 39822).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What do you do after disconnecting the washer hose for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    Lift the wiper arm off the wiper transmission.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you align the wiper arm during installation for the 2000 Chevrolet Corvette? Posted by Customer
    A:
    Align the tip of the wiper blade assembly with the masking tape on the windshield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What features does the wiper blade element have for the 2002 Chevrolet Corvette? Posted by Customer
    A:
    The wiper blade element features two notches at one end that engage with the bottom claw set of the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the next step after placing the masking tape for the 2004 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect the washer hose from the air inlet grille panel, then remove the wiper arm nut cover and the wiper arm nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to service and repair the wiper arm for the 2002 Chevrolet Corvette? Posted by Customer
    A:
    Begin by raising the hood and turning the ignition switch to the ACCY position, then set the wiper switch to the DELAY position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after cleaning the wiper blade for the 2000 Chevrolet Corvette? Posted by Customer
    A:
    Rinse the blade with water.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What components need to be removed to access the wiper arm for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Remove the wiper arm nut cover and the wiper arm nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you ensure the wipers are functioning correctly for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Operate the windshield wipers and inspect for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the final step in the process for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Install the wiper blade onto the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be disconnected before removing the wiper arm for the 2003 Chevrolet Impala? Posted by Customer
    A:
    The washer hose from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the wiper arm blade for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Turn the ignition switch to the ACCY position and set the wiper switch to the PULSE position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the first step to replace the wiper arm blade for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Turn ON the ignition and set the wiper switch to DELAY.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be done after positioning the wiper arms for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the wiper arm nut and tighten it to 30 N.m (22 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What components need to be removed to access the wiper arm for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    The wiper arm nut cover and the wiper arm nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wiper Blade Refill 22143943 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22143943 Wiper Blade Refill is available in the market under the name GM Windshield Wiper, Wiper Arm, Wiper Blade. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22143943 Wiper Blade Refill fits certain Chevrolet Impala, Corvette, Express 1500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500. Additionally, it is compatible with Cadillac DeVille, Eldorado, Fleetwood and Buick Regal, Riviera, LaCrosse models.
The original GM component designated by manufacturer part number 22143943 maintains top performance when functioning as the Wiper, Windshield Wiper Blade; Windshield Wiper Blade Refills unit. The component 22143943 is constructed from durable material and its dimensions span 25.1 x 3.5 x 0.7 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Wiper Blade Insert; Wiper Insert; Blade Insert; Blade Assembly Insert; Insert; Wiper, Windshield Wiper; Wiper Blade. The part 22143943 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.