Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2009 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2007 GMC Sierra 1500 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
GMC Sierra 1500 A/C Accumulator
Our website offers an extensive catalog of genuine GMC Sierra 1500 A/C Accumulator at unbeatable prices. Every OEM GMC Sierra 1500 A/C Accumulator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 1500 A/C Accumulator Parts Questions & Experts Answers
Q: How to replace the A/C Accumulator in an A/C system on GMC Sierra 1500?
A: In the replacement of the accumulator, first retrieve the loss of refrigerant. It is necessary to separate the evaporator tube nut first as well as the evaporator. Secondly, remove the nut on the evaporator tube and disconnect the a/c low pressure switch's electrical connector. Loosen the compressor hose nut from the accumulator and the compressor hose afterwards. Then, unscrew the nut from the evaporator fitting, and the accumulator bracket nut from the retaining stud prior to unhooking the accumulator. Unload the accumulator from the retaining bracket bolt and the retaining bracket and dispose of the o-ring seals. For the installation, the o-ring seals should be first installed and then the retaining bracket should be fixed to the accumulator. Install tightening bolt of retaining bracket to 10 n.m ( 89lb in) then, install the accumulator and the accumulator bracket nut and tighten the nut to 9 n.m (80 lb in). Install the nut to the evaporator fitting and tighten the nut to 16 n.m (12 lb ft). Connect the compressor hose to the accumulator and tighten it using the compressor hose nut turned to 16 n.m (12 lb ft). Reconnect the electrical connector to the a/c low pressure switch, and install the nut to the evaporator tube and tighten it with a 25 n.m (18 lb ft). Replace the evaporator tube by connecting it to the evaporator and fasten it using the evaporator tube nut, which is to be tightened to 16 n.m (12 lb ft). Last, but not least, evacuate and recharge system, do the leak test on the fittings of the component with the halogen leak detector (J 39400-A).