How to replace the Camshaft Position Sensor (except RPOs LY2, LY5, LH6, and LMG) on GMC Sierra 1500?

Cleaning the vicinity where the Camshaft Position Sensor (except RPOs LY2, LY5, LH6, and LMG) exists should be the first step before sensor replacement to stop debris from reaching the engine. First raise the vehicle then support it before unconnecting the engine wiring harness electrical connector which is attached to the CMP sensor wire harness. Disconnect the CMP sensor wire harness by removing three bolts (738) on the sensor and disconnecting wiring connectors from both CMP sensor and CMP actuator magnet. Start by disassembling the CMP sensor wire harness 737 and then proceed to detach the CMP sensor 703 along with seal O-ring (704). The CMP sensor O-ring must be tested for damage before a lubricated installation of the sensor. The CMP sensor (703) must be installed onto the front cover and followed by securing the CMP sensor wire harness (737) which should have its electrical connectors attached to the CMP sensor and the CMP actuator magnet. Torque the CMP sensor wire harness bolts (738) to 12 Nm while performing a 106 lb in Torque specification. Lower down your vehicle and connect the engine wiring harness electrical connector to the CMP sensor wire harness.

OEM GMC Sierra 1500 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Position Sensors found

View related parts
GMC Sierra 1500 Camshaft Position Sensor
Part Number: 12591720
$53.35 MSRP: $99.54
You Save: $46.19 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 12568983, 12585545
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Camshaft Position Sensor
Part Number: 19417445
$60.31 MSRP: $122.48
You Save: $62.17 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 GMC Sierra 1500 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
View related parts
GMC Sierra 1500 Engine Camshaft Position Sensor
Part Number: 12623093
$18.36 MSRP: $34.48
You Save: $16.12 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly Camshaft Position; Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Camshaft Position Sensor
Part Number: 12698173
$12.36 MSRP: $23.22
You Save: $10.86 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaced by: 12733487
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL
View related parts
GMC Sierra 1500 Camshaft Position Sensor
Part Number: 19420911
$71.22 MSRP: $127.17
You Save: $55.95 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12561211, 19420372
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2006 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Sierra 1500 Camshaft Position Sensor

Our website offers an extensive catalog of genuine GMC Sierra 1500 Camshaft Position Sensor at unbeatable prices. Every OEM GMC Sierra 1500 Camshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sierra 1500 Camshaft Position Sensor Parts Questions & Experts Answers

Camshaft Position Sensor
12591720
Q: How to replace the Camshaft Position Sensor (except RPOs LY2, LY5, LH6, and LMG) on GMC Sierra 1500?
A: Cleaning the vicinity where the Camshaft Position Sensor (except RPOs LY2, LY5, LH6, and LMG) exists should be the first step before sensor replacement to stop debris from reaching the engine. First raise the vehicle then support it before unconnecting the engine wiring harness electrical connector which is attached to the CMP sensor wire harness. Disconnect the CMP sensor wire harness by removing three bolts (738) on the sensor and disconnecting wiring connectors from both CMP sensor and CMP actuator magnet. Start by disassembling the CMP sensor wire harness 737 and then proceed to detach the CMP sensor 703 along with seal O-ring (704). The CMP sensor O-ring must be tested for damage before a lubricated installation of the sensor. The CMP sensor (703) must be installed onto the front cover and followed by securing the CMP sensor wire harness (737) which should have its electrical connectors attached to the CMP sensor and the CMP actuator magnet. Torque the CMP sensor wire harness bolts (738) to 12 Nm while performing a 106 lb in Torque specification. Lower down your vehicle and connect the engine wiring harness electrical connector to the CMP sensor wire harness.