How to replace the Crankshaft Position Sensor on GMC Sierra 1500?

In order to replace the Crankshaft Position Sensor, first, lift and safely suspend the vehicle. If necessary, take off the oil pan skid plate and its bolts. Unplug the engine wiring harness electrical connectors from the crankshaft position (CKP) sensor, and set the CKP sensor back bolt and the sensor apart. When installing the new CKP sensor, be sure it is seated fully before tightening the bolt to prevent erratic performance and false diagnostic trouble codes (DTCs). If restocking the old CKP sensor, which until now should be brand new O-ring seal on the sensor and oiling with clean engine oil. Mount the CKP sensor with the bolt, tighten the bolt to 10 N.m (89 lb in). Connect the CKP sensor wiring harness electrical connector once again. In cases where appropriate, place the oil pan skid plate and bolt it to the engine, tightening to 28 N.m (21 lb ft). Finally, lower the car and conduct crankshaft position system variation learn procedure.

OEM GMC Sierra 1500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Crankshaft Position Sensors found

View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12596851
$69.25 MSRP: $140.64
You Save: $71.39 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor; Position Sensor
- Replaces: 10456607, 10456532, 12562910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2006 GMC Sierra 1500 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
View related parts
GMC Sierra 1500 Knock Sensor Part Number: 21024981
$32.61 MSRP: $61.25
You Save: $28.64 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaced by: 19434673
- Replaces: 21024729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 GMC Sierra 1500 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
View related parts
GMC Sierra 1500 Camshaft Position Sensor Part Number: 19417445
$66.52 MSRP: $124.92
You Save: $58.40 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 GMC Sierra 1500 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12669636
$28.91 MSRP: $54.30
You Save: $25.39 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12623094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12595966
$36.96 MSRP: $75.06
You Save: $38.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Sierra 1500 | WT | 6 Cyl 4.3 L GAS
View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12560228
$58.99 MSRP: $119.82
You Save: $60.83 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2006 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 40009075
$10.12 MSRP: $18.08
You Save: $7.96 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 55495265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 GMC Sierra 1500 | AT4, AT4X, Denali, Denali Ultimate, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12706708
$7.32 MSRP: $13.08
You Save: $5.76 (45%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 55507118
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View related parts
GMC Sierra 1500 Camshaft Position Sensor Part Number: 12698173
$13.23 MSRP: $24.84
You Save: $11.61 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaced by: 12733487
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL
View related parts
GMC Sierra 1500 Knock Sensor Part Number: 12663209
$4.12 MSRP: $7.73
You Save: $3.61 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12667201
$24.62 MSRP: $44.56
You Save: $19.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaced by: 12712848
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

GMC Sierra 1500 Crankshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Sierra 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Sierra 1500 Crankshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Sierra 1500 Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12703627
Q: How to replace the Crankshaft Position Sensor on GMC Sierra 1500?
A:
In order to replace the Crankshaft Position Sensor, first, lift and safely suspend the vehicle. If necessary, take off the oil pan skid plate and its bolts. Unplug the engine wiring harness electrical connectors from the crankshaft position (CKP) sensor, and set the CKP sensor back bolt and the sensor apart. When installing the new CKP sensor, be sure it is seated fully before tightening the bolt to prevent erratic performance and false diagnostic trouble codes (DTCs). If restocking the old CKP sensor, which until now should be brand new O-ring seal on the sensor and oiling with clean engine oil. Mount the CKP sensor with the bolt, tighten the bolt to 10 N.m (89 lb in). Connect the CKP sensor wiring harness electrical connector once again. In cases where appropriate, place the oil pan skid plate and bolt it to the engine, tightening to 28 N.m (21 lb ft). Finally, lower the car and conduct crankshaft position system variation learn procedure.