How to replace the tailgate latch on GMC Sierra 1500 Classic?

In order to replace the tailgate latch, you have to lower the tailgate and take off the handle bolts, followed by lifting the tailgate. Remove the handle bezel by prying gently on the upper retainer tabs and disengage linkage rods. The side panel cable retainer bolts should have their cables removed from it, as well as the bolt holding the latch assembly. Support then lower the tailgate. Detach the linkage rod from the latch assembly and take out the latch assembly from the tailgate. For installation, link the linkage rod to the latch assembly and install the latch assembly to the vehicle. Mount the latch assembly bolts, pressing until they achieve a torque of 25 N.m (18 lb ft). Connect cables on both sides of the tailgate to the side panel cable retainer bolts, push the linkage rods, and lift the tailgate. Lastly, install the tailgate handle bezel by forcing it into the door until fully located and tightening the handle bolts to 25 N.m (18 lb ft).

OEM GMC Sierra 1500 Classic Tailgate Latch

Rear Tailgate Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tailgate Latches found

View related parts
GMC Sierra 1500 Classic Lock, Passenger Side
Part Number: 15921949
$70.13 MSRP: $102.10
You Save: $31.97 (32%)
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Pick Up Box End Gate (W/Cable); Trunk Latch; Door Lock; Latch; Latch, End Gate Lock
- Position: Passenger Side
- Replaces: 15041973, 15044048, 15107221, 15711131, 15043665, 15931080, 15756844, 15815481
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 1500 Classic | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Classic Lock, Driver Side
Part Number: 15921948
$70.13 MSRP: $102.10
You Save: $31.97 (32%)
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Pick Up Box End Gate (W/Cable); Trunk Latch; Door Lock; Latch; Latch, End Gate Lock
- Position: Driver Side
- Replaces: 15043666, 15931079, 15815480, 15041972, 15048391, 15107220, 15756843
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 1500 Classic | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Sierra 1500 Classic Tailgate Latch

Our website offers an extensive catalog of genuine GMC Sierra 1500 Classic Tailgate Latch at unbeatable prices. Every OEM GMC Sierra 1500 Classic Tailgate Latch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sierra 1500 Classic Tailgate Latch Parts Questions & Experts Answers

Lock, Driver Side
15921948
Q: How to replace the tailgate latch on GMC Sierra 1500 Classic?
A: In order to replace the tailgate latch, you have to lower the tailgate and take off the handle bolts, followed by lifting the tailgate. Remove the handle bezel by prying gently on the upper retainer tabs and disengage linkage rods. The side panel cable retainer bolts should have their cables removed from it, as well as the bolt holding the latch assembly. Support then lower the tailgate. Detach the linkage rod from the latch assembly and take out the latch assembly from the tailgate. For installation, link the linkage rod to the latch assembly and install the latch assembly to the vehicle. Mount the latch assembly bolts, pressing until they achieve a torque of 25 N.m (18 lb ft). Connect cables on both sides of the tailgate to the side panel cable retainer bolts, push the linkage rods, and lift the tailgate. Lastly, install the tailgate handle bezel by forcing it into the door until fully located and tightening the handle bolts to 25 N.m (18 lb ft).