Make sure this part fits

GM 15921949
Lock, Passenger Side

1999-2007 GM

Customer Questions & Expert Answers (25)
GM 15921949 Lock, Passenger Side
GM 15921949 Lock, Passenger Side
  • Part Description
    Latch Assembly-Pick Up Box End Gate (W/Cable); Trunk Latch; Door Lock
  • Position
    Passenger Side
  • Replaces
    15041973, 15044048, 15107221, 15711131, 15043665, 15931080, 15756844, 15815481
  • Manufacturer
    General Motors
Make sure this part fits
$70.91 MSRP: $104.15
You Save: $33.24 (32%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15921949 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15921949 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the handle bezel for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Gently pry on the upper retainer tabs to remove the handle bezel and disengage the linkage rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the final step in the replacement process for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Reconnect the electrical connectors and reinstall the upper and lower trim panels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you reconnect the cables for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Connect the cables on each side of the endgate to the side panel cable retainer bolts and engage the linkage rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the first step for installation for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Engage the linkage rod to the latch assembly and install the latch assembly to the vehicle, securing it with the latch assembly bolts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the next step after disconnecting the rods for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the bolts that retain the door lock actuator to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed to disengage the outside handle rod retainer for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The rubber plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the rubber plug for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Disconnect the cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door lock actuator for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Raise the window and remove the door trim panel, followed by the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the endgate handle bezel for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the endgate handle bezel by pressing it into place until fully seated, and tighten the handle bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be done with the bolts retaining the door lock actuator for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the bolts and tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the tailgate latch for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Lower the endgate and loosen the handle bolts, then raise the endgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    How do you remove the latch assembly for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Disengage the linkage rod from the latch assembly and remove the latch assembly from the endgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the first step for installation of the new latch assembly for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Engage the linkage rod to the latch assembly and install the latch assembly to the vehicle, following the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be removed next after disconnecting the rods for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the bolts retaining the door lock actuator to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Begin by installing the control rods to the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be removed to disengage the outside handle rod retainer for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the rubber plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the front side door lock actuator for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Raise the window glass.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the handle bezel for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the handle bezel by gently prying on the upper retainer tabs and disengage the linkage rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    How do you remove the handle bezel for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Gently pry on the upper retainer tabs to remove the handle bezel and disengage the linkage rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be taken out along with the door lock actuator for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Take out the door lock actuator along with the control rods as an assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should you do after removing the handle bezel for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Lower and support the endgate, then remove the cables from the side panel cable retainer bolts and the bolt holding the latch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What are the final steps after reconnecting all components for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Reinstall the water deflector and the door trim panel, and inspect the operation of all related components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the latch assembly for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Disengage the linkage rod from the latch assembly and remove the latch assembly from the endgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What needs to be disconnected from the handle retainer clip for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Disconnect the inside door lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Passenger Side 15921949 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15921949 Lock, Passenger Side is available in the market under the name GM Door Lock, Door Lock Actuator, Tailgate Latch, Tailgate Lock, Trunk Latch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15921949 Lock, Passenger Side fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500. Additionally, it is compatible with Cadillac Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 15921949 maintains top performance when functioning as the Latch Assembly-Pick Up Box End Gate (W/Cable); Trunk Latch; Door Lock unit at its Passenger Side. The component 15921949 is constructed from durable material and its dimensions span 6.8 x 4.4 x 4.4 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Latch, End Gate Lock. The part 15921949 has available replacement options 15041973, 15044048, 15107221, 15711131, 15043665, 15931080, 15756844, 15815481. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.