Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Latch, Door Lock; Door Latch Assembly; Latch
Position: Driver Side
Replaces: 15757062, 15075234
Item Weight: 1.20 Pounds
Item Dimensions: 48.7 x 3.1 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10356958
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 Chevrolet Avalanche 2500 Submodels:
Base | 8 Cyl 8.1 L GAS
2002 Chevrolet Avalanche 2500 Door Lock Actuator
With a comprehensive array of OEM 2002 Chevrolet Avalanche 2500 Door Lock Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Avalanche 2500 Door Lock Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Avalanche 2500 Door Lock Actuator Parts Questions & Experts Answers
Q: How to replace the rear door lock actuator on 2002 Chevrolet Avalanche 2500?
A: A person can replace the rear door lock actuator after they successfully lift the window and eliminate the door trim panel in addition to the water deflector. First disconnect the inside door lock rod from its retention on the handle retainer clip while also separating the manual door lock rod from its retention on the door retainer clips. The removal of the rubber plug will let you disengage the outside handle rod retainer before disconnecting the cylinder lock rod. You should remove the bolts that fasten the door lock actuator to the door frame after which you should pull out the entire door lock actuator assembly with its control rods. Disconnect the electrical connector from the door lock actuator before proceeding to remove the control rods when equipped. The process starts with mounting the control rods to their proper places before plugging in electrical connectors to connect with the door lock actuator whenever present. Mount the door lock actuator onto its designated location on the door after attaching both the outside door handle control rod together with the cylinder lock rod. Screw the door lock actuator bolts on the door while torquing them to 9 N.m (80 lb in). The manual door lock will receive attachments to door retainer clips after which the inside door handle control rod will join the lock assembly and the inside door lock rod will receive attachment to handle retainer clip. To conclude, mount the water deflector together with the door trim panel before investigating the operational performance of all associated elements.