Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15110643
Lock, Front Driver Side

2001-2007 GM

Customer Questions & Expert Answers (41)
GM 15110643 Lock, Front Driver Side
GM 15110643 Lock, Front Driver Side
GM 15110643 Lock, Front Driver Side
GM 15110643 Lock, Front Driver Side
GM 15110643 Lock, Front Driver Side
GM 15110643 Lock, Front Driver Side
  • Part Description
    Lock, Front Side Door; Door Latch Assembly; Door Lock
  • Position
    Front Driver Side
  • Replaces
    15068499, 15053681
  • Manufacturer
    General Motors
Make sure this part fits
$203.63 MSRP: $299.08
You Save: $95.45 (32%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 15110643 Lock, Front Driver Side is Ref No. 5 in the diagram below

    2002 Chevy Suburban 1500 Lock, Front Driver Side Diagram for 15110643
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15110643

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15110643 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15110643 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front door lock actuator on Chevrolet Avalanche 2500? Posted by Customer
    A:
    Begin by raising the window glass followed by door trim panel and water deflector removal. The front Door Lock Actuator replacement requires you to separate the inside door lock rod from the handle retainer clip as well as the manual door lock rod from the door retainer clips. To disconnect the cylinder lock rod you need to remove the rubber plug that lets you release the outside handle rod retainer. The door lock mechanism needs its bolts removing before you can extract the actuator assembly from its mounting position. When applicable disconnect the electrical connector from the Door Lock Actuator and separate the control rods as an additional step. You should begin installation by connecting control rods to their assembly before you connect electrical connectors to the Door Lock Actuator if your vehicle has this feature. Install the Door Lock Actuator to its position on the door and attach the control rod to the outside handle. Then join the cylinder lock rod. Insert Door Lock Actuator mounting bolts into place while tightening them to 9 n.m torque (80 lb in). The door retainer clips accept the manual door lock while the inside Door Handle control rod connects to both the lock assembly and handle retainer clip. After installing the water deflector and door trim panel complete an inspection of all components in operation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power door lock actuator in the front door on GMC Sierra 3500? Posted by Customer
    A:
    One must lift the window glass before taking out the door trim panel and water deflector to replace the power door lock actuator in the front door. Before moving forward the door mechanic should take out the inside door lock rod from its connection to both the handle retainer clip and manual door lock rod from its connection to door retainer clips. The removal of the rubber plug allows you to disconnect both the outside handle rod retainer from the cylinder lock rod. To replace the door lock actuator you should remove its mounting bolts from the door while pulling out all components made up of actuator and control rods. The electrical connector of the door lock actuator and control rods need to be removed when required. You should start the installation process by putting the control rods on the assembly before connecting the electrical connectors to the door lock actuator when it has them. Install the door lock actuator into the door opening while connecting outside door handle control rod and cylinder lock rod. Secure the door lock actuator bolts in place on the door using 9 N.m torque (80 lb in). You should connect three components: the manual door lock should link to the door retainer clips and both the inside door handle control rod must connect to the lock assembly along with the inside door lock rod which must link to the handle retainer clip. You should install the water deflector followed by the door trim panel before performing an inspection of all affected components.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the bottom two bolts for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Tighten these bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be connected to the door retainer clips after installing the door lock actuator for the 2002 Cadillac Escalade? Posted by Customer
    A:
    The manual door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after disconnecting the actuator cable assembly for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the latch bolts and the latch itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after disconnecting the electrical connectors for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Take out the bolts securing the latch actuator and remove the actuator from the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the power door lock actuator in the front door for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    First, raise the window glass.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the torque specification for tightening the bottom two bolts for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Tighten these bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the door lock actuator for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the bolts that secure the door lock actuator to the door and take out the door lock actuator along with the control rods as an assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be taken out along with the door lock actuator for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The control rods as an assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch on the cargo door upper for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after attaching the actuator cable assembly for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reconnect the electrical connector if required.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be disconnected after removing the water deflector for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Disconnect the inside door lock rod from the handle retainer clip and the manual door lock rod from the door retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the purpose of closing the door during installation for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    To allow the latch assembly to self-adjust.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Attach the control rods to the assembly and connect the electrical connectors to the door lock actuator if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after connecting the latch rod for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the latch to the door and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be connected to the handle retainer clip for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Connect the inside door lock rod to the handle retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What needs to be disconnected after removing the rubber plug for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Disconnect the cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the door trim panel for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the latch retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after securing the latch for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the latch retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after raising the window glass for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    The door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be connected to the lock assembly for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Connect the inside door handle control rod to the lock assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the bolts for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Take out the latch from the door and detach the actuator cable assembly from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be disconnected after removing the rubber plug for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the trim panels for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Disconnect the electrical connectors and remove the cables attached to the actuator assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after tightening the bottom two bolts for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Open the door and install the upper bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be disconnected after removing the water deflector for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Disconnect the inside door lock rod from the handle retainer clip and the manual door lock rod from the door retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    First, remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the rear door latch (Cargo Door Upper) for the 2004 GMC Yukon? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the door trim panel for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the latch retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the torque specification for tightening the upper bolt for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Tighten it to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step for installation for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Install the control rods to the assembly and connect the electrical connectors to the door lock actuator, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2004 GMC Yukon? Posted by Customer
    A:
    Start by installing the control rods to the assembly and connecting the electrical connectors to the door lock actuator if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after disconnecting the latch rod for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the latch rod back to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be connected to the door retainer clips after securing the actuator for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Connect the manual door lock to the door retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be disconnected from the door retainer clips for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The manual door lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the bolts for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Disconnect the electrical connector if necessary, and take out the actuator cable assembly from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the final steps in the process for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Finally, install the water deflector and the door trim panel, and inspect the operation of all related components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Front Driver Side 15110643 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15110643 Lock, Front Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15110643 Lock, Front Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15110643 maintains top performance when functioning as the Lock, Front Side Door; Door Latch Assembly; Door Lock unit at its Front Driver Side. The component 15110643 is constructed from durable material and its dimensions span 8.5 x 5.1 x 5.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Lock, Door Lock. The part 15110643 has available replacement options 15068499, 15053681. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.