Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Latch, Door Lock; Door Latch Assembly; Latch
Position: Driver Side
Replaces: 15757062, 15075234
Item Weight: 1.20 Pounds
Item Dimensions: 48.7 x 3.1 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10356958
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
2001 GMC Yukon XL 1500 Door Lock Actuator
With a comprehensive array of OEM 2001 GMC Yukon XL 1500 Door Lock Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Yukon XL 1500 Door Lock Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 GMC Yukon XL 1500 Parts Questions & Experts Answers
Q: How to replace the rear side door lock actuator on 2001 GMC Yukon XL 1500?
A: The replacement of the rear side door lock actuator begins by raising the window before removing the door trim panel alongside the water deflector. First cut the connection of the inside door lock rod from the handle retainer clip and the manual door lock rod from the door retainer clips. To decode the outside handle rod retainer pull off the rubber plug before breaking the cylinder lock rod loose. Strong bolts hold the door lock actuator in place to the door and you should remove them to extract the assembly which includes the door lock actuator and control rods. The electrical connector needs disconnection from the door lock actuator when present together with separate removal of each control rod when needed for service. Begin installation by applying control rods to their assembly before you attach the electrical connector to the door lock actuator (if your model has this accessory). The door lock actuator gets installed on the door structure after you connect the outside door handle control rod to the cylinder lock rod. Apply bolts to the door along with the door lock actuator followed by tightening them to 9 N.m (80 lb in). Manually connect the door lock to its corresponding clips on the door. Then connect the inside door handle control rod to the lock assembly as well as the inside door lock rod to the handle retainer clip. After installing the water deflector and the door trim panel you need to check how all related components function properly.