Make sure this part fits

GM 15110642
Lock, Front Passenger Side

1999-2007 GM

Customer Questions & Expert Answers (29)
GM 15110642 Lock, Front Passenger Side
GM 15110642 Lock, Front Passenger Side
  • Part Description
    Lock, Front Side Door; Door Latch Assembly; Door Lock
  • Position
    Front Passenger Side
  • Replaces
    15068498
  • Manufacturer
    General Motors
Make sure this part fits
$222.26 MSRP: $332.30
You Save: $110.04 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15110642 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15110642 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power door lock actuator in the front door on Chevrolet Silverado 1500? Posted by Customer
    A:
    One must lift the window glass before taking out the door trim panel and water deflector to replace the power door lock actuator in the front door. Before moving forward the door mechanic should take out the inside door lock rod from its connection to both the handle retainer clip and manual door lock rod from its connection to door retainer clips. The removal of the rubber plug allows you to disconnect both the outside handle rod retainer from the cylinder lock rod. To replace the door lock actuator you should remove its mounting bolts from the door while pulling out all components made up of actuator and control rods. The electrical connector of the door lock actuator and control rods need to be removed when required. You should start the installation process by putting the control rods on the assembly before connecting the electrical connectors to the door lock actuator when it has them. Install the door lock actuator into the door opening while connecting outside door handle control rod and cylinder lock rod. Secure the door lock actuator bolts in place on the door using 9 N.m torque (80 lb in). You should connect three components: the manual door lock should link to the door retainer clips and both the inside door handle control rod must connect to the lock assembly along with the inside door lock rod which must link to the handle retainer clip. You should install the water deflector followed by the door trim panel before performing an inspection of all affected components.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after attaching the actuator cable assembly for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Loosely assemble the bottom two bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the door lock actuator for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the bolts that retain the door lock actuator to the door and take out the door lock actuator along with the control rods as an assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What needs to be removed to disengage the outside handle rod retainer for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The rubber plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator and remove the control rods as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the latch retaining bolts and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after securing the latch for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the latch retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What needs to be removed to disengage the outside handle rod retainer for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the rubber plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the latch retaining bolts for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Disconnect the latch rod from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is important to remember when assembling the bottom two bolts for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Loosely assemble the bottom two bolts and close the door to allow the latch assembly to self-adjust.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the latch retaining bolts for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Disconnect the latch rod from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Begin by installing the control rods to the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the door trim panel for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Remove the bolts that secure the latch to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after adjusting the actuator for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Install the cables to the actuator assembly and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Attach the actuator cable assembly to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Begin by installing the control rods to the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the door trim panel for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the latch retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after connecting the latch rod for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Install the latch to the door and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the final steps after reconnecting all components for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Reinstall the water deflector and the door trim panel, and inspect the operation of all related components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step for installation for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Attach the actuator cable assembly to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be installed last in the process for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after connecting the door lock actuator for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Connect the manual door lock to the door retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after tightening the bottom two bolts for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Open the door and install the upper bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after raising the window glass for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    First, remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Front Passenger Side 15110642 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15110642 Lock, Front Passenger Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15110642 Lock, Front Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade ESV models.
The original GM component designated by manufacturer part number 15110642 maintains top performance when functioning as the Lock, Front Side Door; Door Latch Assembly; Door Lock unit at its Front Passenger Side. The component 15110642 is constructed from durable material and its dimensions span 6.5 x 3.2 x 3.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Lock, Door Lock. The part 15110642 has available replacement options 15068498. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.