Make sure this part fits

GM 15110651
Lock, Rear Driver Side

2000-2007 GM

Customer Questions & Expert Answers (43)
GM 15110651 Lock, Rear Driver Side
GM 15110651 Lock, Rear Driver Side
  • Part Description
    Latch, Rear Side Door; Door Latch Assembly; Door Lock
  • Position
    Rear Driver Side
  • Replaces
    15068504
  • Manufacturer
    General Motors
Make sure this part fits
$216.19 MSRP: $314.75
You Save: $98.56 (32%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15110651 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15110651 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the door trim panel for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Remove the bolts that secure the latch to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What needs to be disconnected after removing the rubber plug for the 2002 Cadillac Escalade? Posted by Customer
    A:
    The cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after disconnecting the manual door lock rod for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the rubber plug to disengage the outside handle rod retainer, then disconnect the cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after tightening the bottom two bolts for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Open the door and install the upper bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the torque specification for tightening the bottom two bolts for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Tighten these bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after adjusting the actuator for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the cables to the actuator assembly and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after raising the window glass for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be disconnected after removing the rubber plug for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after installing the door lock actuator for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Install the bolts that retain the door lock actuator to the door, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be detached from the latch for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Detach the actuator cable assembly from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the torque specification for tightening the upper bolt for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Tighten it to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator and remove the control rods as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch on the cargo door lower for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    First, remove the bolts that secure the latch assembly to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be connected to the handle retainer clip for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Connect the inside door lock rod to the handle retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after connecting the latch rod for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install the latch to the door and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be connected to the door lock actuator during installation for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Connect the electrical connectors to the door lock actuator if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What adjustment needs to be made after assembling the actuator for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Close the liftgate glass to adjust the actuator, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Attach the actuator cable assembly to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after disconnecting the latch rod for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the latch rod to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What needs to be disconnected from the handle retainer clip for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the inside door lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed to disengage the outside handle rod retainer for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    The rubber plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be connected to the door lock actuator during installation for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The electrical connectors, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be connected after securing the door lock actuator for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Connect the manual door lock to the door retainer clips, the inside door handle control rod to the lock assembly, and the inside door lock rod to the handle retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear side door lock actuator for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Raise the window and remove the door trim panel, followed by the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the latch retaining bolts and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step after installing the upper bolt for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the door trim panel for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the latch retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after detaching the actuator cable assembly for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the latch bolts and take the latch out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after connecting the latch rod for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the latch to the door and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you install the latch to the door for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the latch to the door, ensuring to tighten the bolts to 9 N.m (80 lb in) as per the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the door trim panel for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Take out the latch retaining nuts and disconnect the latch rod from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be connected to the door retainer clips after installing the actuator for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The manual door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after raising the window glass for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be removed to disengage the outside handle rod retainer for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The rubber plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the torque specification for tightening the upper bolt for the 2004 GMC Yukon? Posted by Customer
    A:
    Tighten it to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step in the process for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the latch retaining bolts and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What needs to be disconnected from the handle retainer clip for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Disconnect the inside door lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in securing the latch assembly for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Install the bolts that secure the latch assembly to the door, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after disconnecting the manual door lock rod for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the rubber plug to disengage the outside handle rod retainer, then disconnect the cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after attaching the actuator cable assembly for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Loosely assemble the bottom two bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after raising the window glass for the 2004 GMC Yukon? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the door lock actuator for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the door lock actuator to the door, connect the outside door handle control rod, and the cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear Driver Side 15110651 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15110651 Lock, Rear Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15110651 Lock, Rear Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15110651 maintains top performance when functioning as the Latch, Rear Side Door; Door Latch Assembly; Door Lock unit at its Rear Driver Side. The component 15110651 is constructed from durable material and its dimensions span 12.2 x 8.3 x 6.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Latch, Door Lock. The part 15110651 has available replacement options 15068504. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.