Other Name: Latch Assembly-Front Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock Assembly; Lock; Latch, Front Side Door; Latch, Door Lock
Other Name: Latch Assembly-Front Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock Assembly; Latch, Front Side Door; Latch, Door Lock
Position: Front Passenger Side
Replaces: 13507151, 13592294, 13597557, 13597533
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2018-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Latch Assembly-Rear Side Door Lower; Door Latch Assembly; Door Lock Cylinder; Trunk Latch; Door Lock; Lower Latch; Lock; Latch; Latch, Door Lock
Position: Rear Lower
Replaces: 15730667, 25784598, 20918764
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1998-2000 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.7 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
| Page 1 of 4 |Next >
1-20 of 69 Results
GMC Yukon Door Latch Assembly
Our website offers an extensive catalog of genuine GMC Yukon Door Latch Assembly at unbeatable prices. Every OEM GMC Yukon Door Latch Assembly comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon Door Latch Assembly Parts Questions & Experts Answers
Q: How to Replace a Door Latch Assembly on a Cargo Door Upper on GMC Yukon?
A: The process to replace the rear door latch (Cargo Door Upper) begins by removing the door trim panel then continuing with bolt removal that keeps the latch attached to the door. You should remove the latch while disconnecting the actuator cable assembly until you can take out the latch bolts and completely remove the latch. Begin by linking the actuator cable assembly to the latch after which you should install the bottom two bolts without tightening them. Expose the latch assembly by closing the door to enable self-adjustment and securely bolt these components to 9 N.m (80 lb in force). Open the door to position the upper bolt before tightening it to 9 N.m (80 lb in) and afterward reattach the door trim panel.