Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Latch, Door Lock; Door Latch Assembly; Latch
Position: Driver Side
Replaces: 15757062, 15075234
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2004 Chevrolet Avalanche 1500 | Base, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L GAS
Chevrolet Avalanche 1500 Door Lock Actuator
Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Door Lock Actuator at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Door Lock Actuator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Avalanche 1500 Door Lock Actuator Parts Questions & Experts Answers
Q: How to replace the front door lock actuator on Chevrolet Avalanche 1500?
A: Starting the front door lock actuator replacement requires the operator to lift the window glass before removing both the door trim panel and water deflector. The inside door lock rod needs disconnecting from the handle retainer clip as well as the manual door lock rod from the door retainer clips. Taking out the rubber plug will allow you to disconnect the cylinder lock rod by disengaging the outside handle rod retainer. The first step requires removing door lock actuator's retaining bolts from the door. The assembly of door lock actuator along with control rods should then be extracted. The door lock actuator electrical connector needs disconnecting in addition to removing control rods when required. The initial step for setup requires control rods to be put into place on the assembly followed by connecting electrical connectors to door lock actuators where present. The door first receives the door lock actuator before the control rod connects to the outside door handle followed by connecting the cylinder lock rod. Fasten the door lock actuator retaining bolts to their mountings on the door but torque them to 9 N.m (80 lb in). The manual door lock will attach to the door retainer clips while the inside door handle control rod must be bound to the lock assembly before connecting it to the handle retainer clip. To complete the procedure install the water deflector alongside the trim panel before thoroughly testing all system functionalities.