Make sure this part fits

GM 10356958
Lock, Driver Side

2000-2004 GM

Customer Questions & Expert Answers (34)
GM 10356958 Lock, Driver Side
  • Part Description
    Latch, Door Lock; Door Latch Assembly
  • Position
    Driver Side
  • Replaces
    15757062, 15075234
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2004 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2004 Chevrolet Avalanche 1500Base, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L GAS
    2002-2004 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    2000-2004 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2003 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2004 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10356958 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10356958 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be disconnected after removing the rubber plug for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Disconnect the cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch (Cargo Door Upper) for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after installing the liftgate lock cylinder for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Attach the actuator to the liftgate and loosely assemble the bolts to the latch actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the bolts for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Take out the latch and disconnect the actuator cable assembly from it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after attaching the actuator cable assembly for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Loosely assemble the bottom two bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done with the manual door lock rod for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Disconnect it from the door retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    First attach the actuator cable assembly to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done with the bolts that retain the door lock actuator for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Install and tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be connected to the handle retainer clip for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The inside door lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if necessary after removing the bolts for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    If necessary, disconnect the electrical connector and then remove the actuator cable assembly from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the latch retaining bolts for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the latch rod from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be installed next after connecting the control rods for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the door lock actuator to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the latch retaining bolts and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Begin by installing the control rods to the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be connected to the door retainer clips after securing the actuator for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Connect the manual door lock to the door retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step for installation for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Attach the control rods to the assembly and connect the electrical connectors to the door lock actuator if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the bolts for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Take out the latch from the door and detach the actuator cable assembly from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Connect the latch rod to the latch, ensuring to adhere to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Install the liftgate lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the torque specification for tightening the bottom two bolts for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Tighten these bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after disconnecting the cylinder lock rod for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the bolts that retain the door lock actuator to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be disconnected after removing the water deflector for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Disconnect the inside door lock rod from the handle retainer clip and the manual door lock rod from the door retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the torque specification for tightening the bottom two bolts for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Tighten these bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the bolts for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Disconnect the electrical connector if necessary, and take out the actuator cable assembly from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after raising the window for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be installed last in the process for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator and remove the control rods as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the latch retaining bolts and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step after installing the upper bolt for the 2004 GMC Yukon? Posted by Customer
    A:
    Reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed next after disconnecting the rods for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the bolts retaining the door lock actuator to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the purpose of closing the door during installation for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    To allow the latch assembly to self-adjust.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the final steps in the process for the 2004 GMC Yukon? Posted by Customer
    A:
    Finally, install the water deflector and the door trim panel, and inspect the operation of all related components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Driver Side 10356958 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10356958 Lock, Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10356958 Lock, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 10356958 maintains top performance when functioning as the Latch, Door Lock; Door Latch Assembly unit at its Driver Side. The component 10356958 is constructed from durable material and its dimensions span 48.7 x 3.1 x 4.2 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch. The part 10356958 has available replacement options 15757062, 15075234. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.