Other Name: Handle; Handle, Door Lock Remote Control Inside
Position: Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2005 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
| Page 1 of 3 |Next >
1-20 of 50 Results
GMC Sierra 3500 Door Handle
Our website offers an extensive catalog of genuine GMC Sierra 3500 Door Handle at unbeatable prices. Every OEM GMC Sierra 3500 Door Handle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 3500 Door Handle Parts Questions & Experts Answers
Q: How to replace the rear inner door handle on GMC Sierra 3500?
A: The first step to change the rear door inside handle is to remove the trim panel before disconnecting the inside door handle mounting bolts. The inside door handle can be separated from the door by pushing it forward until it detaches from its position. During this process disconnect the control rod from the handle mechanism. Before installation of the new inside door handle connect the control rod then insert the handle assembly into proper position. Use the right fastener at its specified position because new fasteners require precise part numbers according to their designated usage. The service manual identifies fasteners which need replacement together with instructions regarding thread locking compound and sealant applications. Fasteners along with their joint surfaces should not receive coatings of paints or lubricants or corrosion inhibitors because this usage can make the fastener vulnerable to harm through changes in torque and clamping force. The correct tightening sequence along with proper specifications should be used because this procedure protects both parts and systems from damage. Finish the process by installing the inside door handle retaining bolts then tighten them to 9 Nm (80 lb in) before reinstalling the trim panel.