Make sure this part fits

GM 19356470
Handle, Outside, Black, Driver Side

2000-2007 GM

Customer Questions & Expert Answers (20)
GM 19356470 Handle, Outside, Black, Driver Side
GM 19356470 Handle, Outside, Black, Driver Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Driver Side
  • Replaces
    15721571
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19356470 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19356470 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you begin servicing and repairing the front door interior handle for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Insert a flat-bladed tool between the door handle bezel and the trim panel to release the handle bezel tab retainers, then remove the door handle bezel from the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    First, remove the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the handle for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the new handle onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    Where can I find guidelines for a binding lock cylinder repair for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Consult the appropriate guidelines for a binding lock cylinder repair.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done if the lock cylinder is binding for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Consult the appropriate guidelines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you release the inside door handle from the door for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Slide the inside door handle forward to release it from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should a binding lock cylinder issue be addressed for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Address the issue accordingly for a binding lock cylinder repair.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you connect the handle rod for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Connect the handle rod to the handle assembly clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What lubricant should be applied when installing a new lock cylinder for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Apply GM P/N 12345120 or Canadian P/N 726548 lubricant to the inside of the lock case and the cylinder keyway.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the process for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reinstall the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps after installing the handle for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Reinstall the rubber cover, the water deflector, and the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the process for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the inside door handle from the door for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Slide the inside door handle forward to detach it from the door and disconnect the control rod from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done if the lock cylinder is binding for the 2006 GMC Yukon? Posted by Customer
    A:
    Address the binding issue as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for tightening the outside handle mounting nuts for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Ensure to tighten the outside handle mounting nuts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the door lock cylinder for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Attach the lock cylinder clip to the lock cylinder rod and connect the handle rod to the handle assembly clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new door handle for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Connect the control rod to the inside door handle and slide the handle into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the lock cylinder and handle rod for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Attach the lock cylinder clip to the lock cylinder rod and connect the handle rod to the handle assembly clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done to secure the handle during the process for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Secure the handle with masking tape while removing the outside handle mounting nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Black, Driver Side 19356470 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19356470 Handle, Outside, Black, Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19356470 Handle, Outside, Black, Driver Side fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD models.
The original GM component designated by manufacturer part number 19356470 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Driver Side. The component 19356470 is constructed from durable material and its dimensions span 11.9 x 6.4 x 4.5 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19356470 has available replacement options 15721571. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.