Make sure this part fits

GM 19356468
Handle, Outside, Black, Front Driver Side

1999-2007 GM

Customer Questions & Expert Answers (15)
GM 19356468 Handle, Outside, Black, Front Driver Side
GM 19356468 Handle, Outside, Black, Front Driver Side
  • Part Description
    Handle Assembly, Front Side Door Outside *Black; Exterior Door Handle
  • Position
    Front Driver Side
  • Replaces
    15034985
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19356468 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19356468 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after lubricating the lock cylinder for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install the door lock cylinder into the outside handle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the outboard nut for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the door lock cylinder from the outside handle housing and then take out the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    First, remove the trim panel and the inside door handle mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps after installing the handle for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the rubber cover, the water deflector, and the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should a binding lock cylinder issue be addressed for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Address the issue accordingly for a binding lock cylinder repair.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What additional components may need to be disconnected for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    If required, disconnect the electrical connector and remove the actuator cable along with the door lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be detached from the rod clip for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Detach the outside handle rod and the lock cylinder rod from their clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step after installing the inside door handle for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Install the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after lubricating the lock cylinder for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the door lock cylinder into the outside handle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the installation process for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Install the inside door handle retaining bolts, tightening them to 9 Nm (80 lb in), and reinstall the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the door handle assembly for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    For installation, connect the control rod to the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door exterior handle for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Begin by removing the trim panel and pulling back the water deflector as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the handle for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the new handle onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the door lock cylinder for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Attach the lock cylinder clip to the lock cylinder rod and connect the handle rod to the handle assembly clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Black, Front Driver Side 19356468 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19356468 Handle, Outside, Black, Front Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19356468 Handle, Outside, Black, Front Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 19356468 maintains top performance when functioning as the Handle Assembly, Front Side Door Outside *Black; Exterior Door Handle unit at its Front Driver Side. The component 19356468 is constructed from durable material and its dimensions span 10.8 x 5.9 x 2.9 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Handle, Door Outside Handle. The part 19356468 has available replacement options 15034985. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.