Other Name: Pad, Rear Seat Back Cushion; Pad, Ae7 - Front Split Bench ("D" Trim); Pad, Seat Back Cushion
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
GMC Sierra 3500 Seat Cushion Pad
Our website offers an extensive catalog of genuine GMC Sierra 3500 Seat Cushion Pad at unbeatable prices. Every OEM GMC Sierra 3500 Seat Cushion Pad comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 3500 Seat Cushion Pad Parts Questions & Experts Answers
Q: How to remove and replace the Seat Cushion Pad and trim cover on GMC Sierra 3500?
A: The procedure for seat cushion trim cover and pad replacement starts with front nuts removal beneath the seat cushion then moving onto removing the front seat trim panel. The lumbar wire harness needs disconnecting and the lumbar cable needs unsnapping for vehicles having power lumbar features. When replacing the seat cushion trim cover and pad disconnect the electrical connectors and detach the pressure sensor from the front passenger seat frame if your vehicle has an Inflatable Restraint Passenger Presence System. Start by pulling the seat cushion forward from its rear plastic holders to lift it off then uninstall the lumbar actuator and seat switch bezel. To replace the seat cushion pad and frame you must first unclip the trim cover from the frame before using a side motion for pad and cover separation. The passenger presence system requires assembly replacement due to safety concerns because all parts including bladder, pressure sensor, seat cushion and control module must be replaced simultaneously. A front passenger seat cushion replacement requires complete replacement of the Inflatable Restraint Passenger Presence System. The seat cushion pad and seat cushion heater element need removal from the frame. Start the installation process by placing the seat cushion heater element first if the system supports it then add the Inflatable Restraint Passenger Presence System. Connect the seat cushion pad to the seat cushion frame before gently pulling the seat cushion cover over the frame pad in a side-to-side direction. Secure the seat trim cover to the seat cushion frame before you install the lumbar actuator along with the seat switch bezel. Handle the cushion to fit onto its rear plastic holders and move it to the back position. Installation of the lumbar cable and the lumbar wire harness begins prior to attaching the pressure sensor to the seat frame (if power lumbar is present). Complete the cable connection procedure then attach front nuts to underside studs on the cushion before tightening each screw to 21 N.m (15 lb ft). In the final step install the front seat trim panel and perform a re-zero operation on the Inflatable Restraint Passenger Presence System.