How to replace the fuel filler hose on GMC Yukon?

The first step to replace the fuel tank filler pipe demands users to clean fuel connections along with surrounding areas to stop contamination before they extract the fuel fill cap. Start by removing the torx(R) screws and retainer fixing the fuel tank filler housing to the body followed by taking out the spare tire stowage lock cylinder when needed along with the retainer. Raise the vehicle for support while you detach the clip holding the rear axle vent hose to the fill pipe before taking out the air suspension hose by the fill pipe. The chassis wiring harness ground bolt along with the left rear lamp ground wire and the fill pipe ground strap should be removed from the frame. First loosen the clamp around the fuel fill hose and disconnected the fill hose from the fuel tank. You should disconnect the fuel fill pipe vent line quick connect fitting from its connection to the evaporative emission (EVAP) canister vent solenoid valve while also loosening the fuel tank vent valve clamp on the fuel fill pipe vent hose. Music the fuel fill pipe bracket bolts at positions 2 and 4 then use caps to seal both the fuel tank opening and evap vent line to avoid contamination and extract the fuel fill pipe assembly. The replacement of any parts in the fill pipe assembly requires complete disassembly of components starting from fuel tank filler vent hose followed by fuel tank fill pipe housing bolts before moving to fuel tank fill pipe housing and continuing with fuel tank fill hose and then fuel tank fill pipe clip and finally fuel tank fill hose clamp and evaporative emission hose and evaporative emission hose clamp. The proper torque settings during installation are 2.5 nm (22 lb in) for the evaporative emission hose clamp and 2.5 nm (22 lb in) and 2.3 nm (20 lb in) for both fuel tank fill hose clamps and fuel tank fill pipe housing bolts. Begin fuel tank installation by removing both caps from the fuel tank opening and evap vent line and position the fuel fill hose into the fuel tank with correct alignment. The process includes connecting the fuel fill pipe vent hose to the fuel tank vent valve followed by positioning the tab on the fuel fill pipe into the frame notch then securing fuel fill pipe bracket bolts (2, 4) at 12 nm (106 lb in). Fasten the evap canister vent solenoid valve to the fuel fill pipe vent line quick connect fitting and tighten both the fuel fill hose clamp and fuel fill pipe vent hose clamp to 2.5 nm (22 lb in ). You should position the fill pipe ground strap opposite the left rear lamp ground wire before framing both parts for a 9 nm (80 lb in) tightness on the chassis wiring harness ground bolt. When needed connect the air suspension hose to the fill pipe while also attaching the vent hose clip to the retainer and finally secure the fuel tank filler housing with body torx(R) screws to 2.3 nm (20 lb in). Finish the procedure by installing spare tire components along with stowage lock cylinders (when present) before putting back the fuel fill cap.

OEM GMC Yukon Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Fuel Filler Hoses found

View related parts
GMC Yukon Filler Neck
Part Number: 20792232
$76.91 MSRP: $128.18
You Save: $51.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 25858609
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 GMC Yukon | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Yukon Upper Hose
Part Number: 84692824
$32.38 MSRP: $50.73
You Save: $18.35 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose; Fuel Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Lower Hose
Part Number: 84564113
$23.58 MSRP: $36.93
You Save: $13.35 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose; Fuel Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Filler Neck
Part Number: 85512438
$167.44 MSRP: $250.29
You Save: $82.85 (34%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Replaces: 84731626
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Filler Neck
Part Number: 85545882
$135.81 MSRP: $203.00
You Save: $67.19 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Filler Pipe
- Replaced by: 86819921
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Lower Hose
Part Number: 84818368
$42.85 MSRP: $63.77
You Save: $20.92 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose; Fuel Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Lower Hose
Part Number: 84224659
$30.83 MSRP: $45.89
You Save: $15.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler
- Replaces: 84018881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Vent Hose
Part Number: 84711944
$21.62 MSRP: $32.17
You Save: $10.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Fuel Hose; Hose, Evaporation Emission System(Fuel Tank End)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Upper Hose
Part Number: 84711946
$32.38 MSRP: $48.18
You Save: $15.80 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose; Fuel Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Vent Hose
Part Number: 84564116
$24.96 MSRP: $37.15
You Save: $12.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Fuel Hose; Hose, Evaporation Emission System(Fuel Tank End)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Vent Hose
Part Number: 84692825
$47.05 MSRP: $70.02
You Save: $22.97 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Fuel Hose; Hose, Evaporation Emission System(Fuel Tank End)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Lower Hose
Part Number: 22951231
Product Specifications
- Other Name: Hose, Fuel Tank Filler
- Replaces: 15289733
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Filler Neck
Part Number: 15156559
Product Specifications
- Other Name: Pipe Assembly; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 GMC Yukon | SLE, SLT | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Filler Neck
Part Number: 15644293
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose; Fuel Hose; Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Hose
Part Number: 15994944
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 GMC Yukon | SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Upper Hose
Part Number: 23113672
$34.35 MSRP: $51.11
You Save: $16.76 (33%)
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Lower Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Lower Hose
Part Number: 22951221
Product Specifications
- Other Name: Hose, Fuel Tank Filler
- Replaces: 15289732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Upper Pipe
Part Number: 25858610
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 GMC Yukon | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Yukon Filler Neck
Part Number: 15712148
Product Specifications
- Other Name: Pipe, Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Filler Neck
Part Number: 23232569
$130.59 MSRP: $195.20
You Save: $64.61 (34%)
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

| Page 1 of 2 |Next >

1-20 of 36 Results

GMC Yukon Fuel Filler Hose

Our website offers an extensive catalog of genuine GMC Yukon Fuel Filler Hose at unbeatable prices. Every OEM GMC Yukon Fuel Filler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon Fuel Filler Hose Parts Questions & Experts Answers

Upper Hose
15124940
Q: How to replace the fuel filler hose on GMC Yukon?
A: The first step to replace the fuel tank filler pipe demands users to clean fuel connections along with surrounding areas to stop contamination before they extract the fuel fill cap. Start by removing the torx(R) screws and retainer fixing the fuel tank filler housing to the body followed by taking out the spare tire stowage lock cylinder when needed along with the retainer. Raise the vehicle for support while you detach the clip holding the rear axle vent hose to the fill pipe before taking out the air suspension hose by the fill pipe. The chassis wiring harness ground bolt along with the left rear lamp ground wire and the fill pipe ground strap should be removed from the frame. First loosen the clamp around the fuel fill hose and disconnected the fill hose from the fuel tank. You should disconnect the fuel fill pipe vent line quick connect fitting from its connection to the evaporative emission (EVAP) canister vent solenoid valve while also loosening the fuel tank vent valve clamp on the fuel fill pipe vent hose. Music the fuel fill pipe bracket bolts at positions 2 and 4 then use caps to seal both the fuel tank opening and evap vent line to avoid contamination and extract the fuel fill pipe assembly. The replacement of any parts in the fill pipe assembly requires complete disassembly of components starting from fuel tank filler vent hose followed by fuel tank fill pipe housing bolts before moving to fuel tank fill pipe housing and continuing with fuel tank fill hose and then fuel tank fill pipe clip and finally fuel tank fill hose clamp and evaporative emission hose and evaporative emission hose clamp. The proper torque settings during installation are 2.5 nm (22 lb in) for the evaporative emission hose clamp and 2.5 nm (22 lb in) and 2.3 nm (20 lb in) for both fuel tank fill hose clamps and fuel tank fill pipe housing bolts. Begin fuel tank installation by removing both caps from the fuel tank opening and evap vent line and position the fuel fill hose into the fuel tank with correct alignment. The process includes connecting the fuel fill pipe vent hose to the fuel tank vent valve followed by positioning the tab on the fuel fill pipe into the frame notch then securing fuel fill pipe bracket bolts (2, 4) at 12 nm (106 lb in). Fasten the evap canister vent solenoid valve to the fuel fill pipe vent line quick connect fitting and tighten both the fuel fill hose clamp and fuel fill pipe vent hose clamp to 2.5 nm (22 lb in ). You should position the fill pipe ground strap opposite the left rear lamp ground wire before framing both parts for a 9 nm (80 lb in) tightness on the chassis wiring harness ground bolt. When needed connect the air suspension hose to the fill pipe while also attaching the vent hose clip to the retainer and finally secure the fuel tank filler housing with body torx(R) screws to 2.3 nm (20 lb in). Finish the procedure by installing spare tire components along with stowage lock cylinders (when present) before putting back the fuel fill cap.