How to replace the fuel pressure sensor on GMC Yukon?

Vehicle owners must detach the front propeller shaft when replacing the Fuel Pressure Sensor only on vehicles with 4 wheel drive (4WD). First disconnect the chassis wiring harness electrical connector from the Fuel Pressure Sensor. Then use a shop towel to cover the Fuel Pressure Sensor fitting which will absorb any leaking fuel. To replace the Fuel Pressure Sensor you should first remove it from the fuel line and discard its o-ring seal. Clean engine oil must be applied to the new o-ring before you install it on the fuel line fitting. Place another shop towel on the fitting of the Fuel Pressure Sensor to prevent fuel leakage before fitting the sensor to the line. Fasten the Fuel Pressure Sensor to its fitting on the fuel line by torques to 15 nm (11 lb ft). The chassis wiring harness electrical connector needs installation onto the Fuel Pressure Sensor before lowering the vehicle. Check for fuel leaks by first keeping the ignition on while the engine stays off for two seconds and then making the ignition off for ten seconds followed by another two-second ignition on period with the engine still off. During this sequence inspect for any fuel leakage. After installing the front propeller shaft you must reinstall it only when the vehicle includes 4wd.

OEM GMC Yukon Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Pressure Sensors found

View related parts
GMC Yukon Fuel Pressure Regulator, Passenger Side Part Number: 16238399
$54.17 MSRP: $101.06
You Save: $46.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Pressure Sensor, Passenger Side Part Number: 13502903
$48.74 MSRP: $100.17
You Save: $51.43 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
- Position: Passenger Side
- Replaces: 13502510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2023 GMC Yukon | AT4, Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Pressure Sensor Part Number: 12673824
$65.33 MSRP: $132.70
You Save: $67.37 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection Fuel Rail Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor, Computer Control Sensors
- Replaces: 12623130
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Pressure Sensor Part Number: 12247409
$45.23 MSRP: $92.95
You Save: $47.72 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Tank Pressure Sensor; Sensor, Fuel Tank Meter/Pump
- Replaces: 88965447
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Pressure Sensor Part Number: 12708493
$22.92 MSRP: $43.04
You Save: $20.12 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection; Fuel Rail Pressure Sensor; Fuel Tank Pressure Sensor; Sensor, Computer Control Sensors
- Replaces: 12684286, 12664124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Yukon | AT4, Denali, Denali Ultimate, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Water Sensor Part Number: 12375515
$127.49 MSRP: $239.42
You Save: $111.93 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Meter/Pump
- Replaces: 12511965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Pressure Sensor Part Number: 55490628
$67.46 MSRP: $120.46
You Save: $53.00 (44%)
Product Specifications
- Other Name: Sensor Assembly-High Pressure Diesel Fuel; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor, Fuel Tank Meter/Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL

GMC Yukon Fuel Pressure Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Pressure Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon Fuel Pressure Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Fuel Pressure Sensor in GMC Yukon automobiles is sometimes referred to as a fuel tank pressure sensor since it is used to monitor and determine fuel pressure in the fuel tank, and the rail. After converting this information the sensor writes the same to the vehicular microprocessor to allow the necessary adjustment on the timing for efficiency in the engine. Depending on the specific Yukon model, there can be several types of fuel pressure sensors still, and their primary goal is to maintain the proper operation of the engine. Symptoms of a bad sensor include hard starting, poor fuel economy, power, and acceleration, and the lightening of the check engine light. Another crucial aspect to be stressed regularly is the fuel pressure sensors used in the regulation of the engine's fuel supply.

GMC Yukon Fuel Pressure Sensor Parts and Q&A

Pressure Sensor, Passenger Side
13502903
Q: How to replace the fuel pressure sensor on GMC Yukon?
A:
Vehicle owners must detach the front propeller shaft when replacing the Fuel Pressure Sensor only on vehicles with 4 wheel drive (4WD). First disconnect the chassis wiring harness electrical connector from the Fuel Pressure Sensor. Then use a shop towel to cover the Fuel Pressure Sensor fitting which will absorb any leaking fuel. To replace the Fuel Pressure Sensor you should first remove it from the fuel line and discard its o-ring seal. Clean engine oil must be applied to the new o-ring before you install it on the fuel line fitting. Place another shop towel on the fitting of the Fuel Pressure Sensor to prevent fuel leakage before fitting the sensor to the line. Fasten the Fuel Pressure Sensor to its fitting on the fuel line by torques to 15 nm (11 lb ft). The chassis wiring harness electrical connector needs installation onto the Fuel Pressure Sensor before lowering the vehicle. Check for fuel leaks by first keeping the ignition on while the engine stays off for two seconds and then making the ignition off for ten seconds followed by another two-second ignition on period with the engine still off. During this sequence inspect for any fuel leakage. After installing the front propeller shaft you must reinstall it only when the vehicle includes 4wd.